If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

Tornado

Discussion in 'Steam Traction' started by Leander's Shovel, Oct 20, 2007.

  1. Johnb

    Johnb Nat Pres stalwart

    Joined:
    Dec 3, 2014
    Messages:
    14,316
    Likes Received:
    16,391
    Gender:
    Male
    Occupation:
    Retired, best job I've ever had
    Location:
    Buckinghamshire
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    I think TPWS is about £30K so not cheap and wouldn’t there be room for it? The tender front of 35028 is crammed with electronic gizmos with no room for any more. All a bit academic as I asked at the last A1 Trust roadshow about running in Europe and it was an emphatic no.
     
    MuzTrem likes this.
  2. guycarr360

    guycarr360 Part of the furniture

    Joined:
    Oct 4, 2005
    Messages:
    4,414
    Likes Received:
    2,729
    Gender:
    Male
    Location:
    Chester le Street County Durham
    I am sure this was something mentioned a while ago, a decent amount to be honest.

    As a PR exercise great, but in the real world, enough work exists in the UK to keep her busy.
     
    Johnb likes this.
  3. class8mikado

    class8mikado Part of the furniture

    Joined:
    Jun 1, 2009
    Messages:
    3,610
    Likes Received:
    1,438
    Occupation:
    Print Estimator/ Repository of Useless Informatio.
    Location:
    Bingley W.Yorks.
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Much play has been made of the CE Badge on the Meiningen boilers...was this ever/ is this now of much relevance ?
     
  4. MellishR

    MellishR Resident of Nat Pres Friend

    Joined:
    Apr 16, 2009
    Messages:
    8,068
    Likes Received:
    5,165
    That depends whether the relevant regs are among those that Boris's government intends to keep or those that they intend to scrap. I believe some of the EU laws that are for the benefit of citizens, and that Boris promised to keep when campaigning for the election, were then left out of the Brexit bill.
     
    andrewshimmin likes this.
  5. steamvideosnet

    steamvideosnet Well-Known Member

    Joined:
    Apr 12, 2011
    Messages:
    1,968
    Likes Received:
    2,476
    Gender:
    Male
    Location:
    Southampton, UK
    It wouldn’t happen... the valve gear would fall apart again!

    James
     
    Landshrew and Will RL like this.
  6. ghost

    ghost Part of the furniture

    Joined:
    May 29, 2006
    Messages:
    3,967
    Likes Received:
    5,064
    Gender:
    Male
    Location:
    N.Ireland
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Rather an unfair comment on the A1 engineering team. The valve gear has never "fallen apart".

    Keith
     
    Derek Riley and Wenlock like this.
  7. Johnb

    Johnb Nat Pres stalwart

    Joined:
    Dec 3, 2014
    Messages:
    14,316
    Likes Received:
    16,391
    Gender:
    Male
    Occupation:
    Retired, best job I've ever had
    Location:
    Buckinghamshire
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Possibly not an unfair comment as I’m sure all that reciprocating motion was not designed for those sort of speeds and I’m sure the A1 Trust would not be so irresponsible with other people’s money to even try it. We still don’t know the full background to the Ebor Flyer incident. All we do know is there will be no more 90mph running
     
  8. ghost

    ghost Part of the furniture

    Joined:
    May 29, 2006
    Messages:
    3,967
    Likes Received:
    5,064
    Gender:
    Male
    Location:
    N.Ireland
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Still unfair as it didn't "fall apart". Falling apart implies that it was poorly made or put together, which the mileage both before and after the incident proves is not the case. A part broke. Could've happened on any trip.

    Keith
     
    Victor and Wenlock like this.
  9. Johnb

    Johnb Nat Pres stalwart

    Joined:
    Dec 3, 2014
    Messages:
    14,316
    Likes Received:
    16,391
    Gender:
    Male
    Occupation:
    Retired, best job I've ever had
    Location:
    Buckinghamshire
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    I don’t think we will ever know the real cause
     
  10. Jimc

    Jimc Part of the furniture

    Joined:
    Sep 8, 2005
    Messages:
    4,052
    Likes Received:
    4,665
    Occupation:
    Once computers, now part time writer I suppose.
    Location:
    SE England
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Not really. It may not have legislative relevance, but it doesn't make it meaningless. Look at all those companies that proudly trumpet ISO9001 compliance. There's no legal requirement for them to get those certificates, but they consider there are business advantages in doing so.
     
  11. Flying Phil

    Flying Phil Part of the furniture

    Joined:
    Dec 10, 2018
    Messages:
    2,696
    Likes Received:
    5,501
    Gender:
    Male
    Location:
    Leicestershire
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    I still think it was the middle cylinder valve seizing in its liner, possibly due to lubrication problems or due to the winter overhaul which included reboring and new rings. Despite the careful "running in" on a preserved line, that would not have generated the running temperature that the ""Ebor Flyer" running would create - especially in the middle cylinder. The previous years 100mph showed what could safely be achieved.....but the running clearances would have been at the higher end of the scale - after 8 years of running.....But this is only my opinion.
     
    Landshrew and jnc like this.
  12. Steve

    Steve Resident of Nat Pres Friend

    Joined:
    Oct 7, 2006
    Messages:
    11,930
    Likes Received:
    10,088
    Occupation:
    Gentleman of leisure, nowadays
    Location:
    Near Leeds
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    I'm struggling to understand the difference between 'fall apart' and 'a part broke'. If a part broke, surely it fell apart? At the end of the day, though, I'm sure that James was not being serious with his quip, just as many others are, me included.
     
    Landshrew and steamvideosnet like this.
  13. MellishR

    MellishR Resident of Nat Pres Friend

    Joined:
    Apr 16, 2009
    Messages:
    8,068
    Likes Received:
    5,165
    I thought the Trust's explanation (roughly speaking a combination of poor lubrication, unfavourable tolerances and imperfect alignment, any one of which alone would probably have done no harm) made good sense.

    Do we know that? Who has said so? The last I heard was that the failure would have taken longer to happen at a lower speed but would still have happened, and that the Trust had said no more 90 mph for the time being. The Peppercorn A1s were in most respects improved A4s, and Tornado is a slightly improved version of those, so it should be good for well over 75 mph.
     
    jnc and flying scotsman123 like this.
  14. Johnb

    Johnb Nat Pres stalwart

    Joined:
    Dec 3, 2014
    Messages:
    14,316
    Likes Received:
    16,391
    Gender:
    Male
    Occupation:
    Retired, best job I've ever had
    Location:
    Buckinghamshire
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    I still get the feeling that we haven’t been told everything about the Ebor incident and what happened subsequently when the Loco was stuck at the Nene Valley with WCRC having to take over the job of moving it. No doubt, if there is anything, it will come out eventually. To run at 90mph will require a TOC willing to do it, I don’t think W.C. are authorised to and DBC haven’t said they will again.
     
  15. 242A1

    242A1 Well-Known Member

    Joined:
    Dec 3, 2006
    Messages:
    1,558
    Likes Received:
    1,299
    Are you sure that it is improved over the A4? How many years and for how many miles have Gresley 3 cylinder locomotives run in preservation? And how many failures of the inside valve gear have occurred? And on the A4s?

    We all know that speeds in excess of 90 mph have been achieved by the the preserved A4s on numerous occasions, they will have required less power output to achieve it too.

    The inside valve gear fitted to the A1 is different to that fitted to the outside cylinders and reading the analysis on the Don Ashton site is interesting. You then have that single cylinder hanging out over the front of the engine, you should get Mr Elliot to talk about that one.

    So apart from the roller bearings and being newer what did the A1s bring to the table? A larger grate? More horsepower can be obtained from a grate a little over 40 sq. ft. than was ever felt to be required in the U.K. So what else?
     
  16. LMS2968

    LMS2968 Part of the furniture

    Joined:
    Sep 1, 2006
    Messages:
    2,987
    Likes Received:
    5,084
    Gender:
    Male
    Occupation:
    Lecturer retired: Archivist of Stanier Mogul Fund
    Location:
    Wigan
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Well, as A4s do not have inside valve gear, the answer is bound to be none. From an engineering perspective, the reasons given by the A1 Trust are perfectly feasible and I struggle to see the need for a conspiracy theory.

    Even in BR days and before, locos had been known to drop their valve gear on occasion. I recall a photo in BRILL many years ago of Stanier Pacific - generally very reliable machines - 6256 with its right hand valve gear bent and twisted, having failed spectacularly at speed on the main line.

    As the Americans put it, "Sh*t happens."
     
    60017, andrewshimmin, jnc and 7 others like this.
  17. W.Williams

    W.Williams Well-Known Member

    Joined:
    Dec 20, 2015
    Messages:
    1,585
    Likes Received:
    1,465
    Occupation:
    Mechanical Engineer
    Location:
    Aberdeenshire
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Just when you think the horse is dead, there it goes twitching and writhing all over the place.

    The Ebor incident really has been done to death further up the thread. There is no conspiracy despite how much some might want it. Seized valve and a subsequent fatigue failure in the motion.

    End.
     
    Last edited: Feb 3, 2020
    jnc likes this.
  18. 242A1

    242A1 Well-Known Member

    Joined:
    Dec 3, 2006
    Messages:
    1,558
    Likes Received:
    1,299
    The A4s do have a valve gear, how could they not have? It may not be a valve gear as some might know it but it is referred to as a valve gear.

    As for a conspiracy theory I agree that their is no need for one, the Trust have explained things well enough. Are you suggesting that what I previously posted supports the theory? It does not, it merely points out that the A1 does not represent the level of improvement that some believe that it does.
     
  19. Steve

    Steve Resident of Nat Pres Friend

    Joined:
    Oct 7, 2006
    Messages:
    11,930
    Likes Received:
    10,088
    Occupation:
    Gentleman of leisure, nowadays
    Location:
    Near Leeds
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    What failed in fatigue?
     
  20. LMS2968

    LMS2968 Part of the furniture

    Joined:
    Sep 1, 2006
    Messages:
    2,987
    Likes Received:
    5,084
    Gender:
    Male
    Occupation:
    Lecturer retired: Archivist of Stanier Mogul Fund
    Location:
    Wigan
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Fair enough, the Gresley engines have between the frames a 1:1 lever and a 2:1 lever, so call it a valve gear if you want. I don't have the knowledge to compare A4s with A1s from any point of view, performance on the road or mechanical; I leave that for others.

    I'm unsure of the reason for your second paragraph. The bulk of my reply was a discussion with Johnb, but I've no real argument with anything in your Post 5815.
     

Share This Page