If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

Big Ben and Little Len - Overall swept corridor height and width limitations

Тема в разделе 'Narrow Gauge Railways', создана пользователем BiggerBob, 11 ноя 2021.

Tags:
  1. BiggerBob

    BiggerBob New Member

    Дата регистрации:
    9 сен 2007
    Сообщения:
    73
    Симпатии:
    52
    Tkere is an obvious difference between the swept corridor height and width of narrow gauge rolling stock. Is this tabulated by line? For example would the Brecon Mountain Railway locomotives foul the clearances on other lines?
     
    BiggerBob, 11 ноя 2021
    #1
  2. meeee

    meeee Member

    Дата регистрации:
    28 мар 2006
    Сообщения:
    886
    Симпатии:
    1.382
    Yes. Especially as a narrow gauge railway could be 15inches or it could be 4ft. Most railways regardless of gauge will or should be keeping information on the loading gauge as this is specific to each route.

    The Brecon Mountain Railway is a 2ft gauge line on a standard gauge trackbed. So it's loading gauge is quite generous.

    Tim
     
    meeee, 11 ноя 2021
    #2
  3. Pete Thornhill

    Pete Thornhill Resident of Nat Pres Staff Member Administrator Moderator Friend

    Дата регистрации:
    24 июл 2008
    Сообщения:
    7.767
    Симпатии:
    5.895
    A good example would be the difference in loading gauge between the FR/WHR. There’s no chance of a Garrett or the WHR modern stock being able to run on the FR, such is the difference between the two loading gauges and that is two railways basically connected together as one.
     
    Pete Thornhill, 11 ноя 2021
    #3
  4. gwralatea

    gwralatea Member

    Дата регистрации:
    31 дек 2014
    Сообщения:
    511
    Симпатии:
    1.006
    Пол:
    Мужской
    Heritage Railway Volunteer:
    No I do not currently volunteer
    all true, although as I'm sure you're aware it's not just a problem with the modern stock - even in the 1920s they cut down the WHR locomotives to try and get them up the FR, with mixed (and not exactly unqualified even at best) success.

    Although, and I think this might be heretical, I've always thought the cut down Moel Tryfan was more attractive than the original. Russell, on the other hand...
     
    gwralatea, 11 ноя 2021
    #4
    Pete Thornhill нравится это.
  5. Pete Thornhill

    Pete Thornhill Resident of Nat Pres Staff Member Administrator Moderator Friend

    Дата регистрации:
    24 июл 2008
    Сообщения:
    7.767
    Симпатии:
    5.895
    Yes it was indeed a problem pre-preservation as you say, I was just trying to give a modern example.
     
    Pete Thornhill, 11 ноя 2021
    #5
  6. Steve B

    Steve B Well-Known Member

    Дата регистрации:
    20 июн 2008
    Сообщения:
    2.167
    Симпатии:
    1.579
    Адрес:
    Shropshire
    It is also not necessarily the case that the larger the track gauge, the larger the loading gauge. The 2ft gauge Welsh Highland and the Vale of Rheidol railways stock is considerably larger than the 2ft 3in gauge Talyllyn and Corris railways stock.

    Steve B
     
    Steve B, 11 ноя 2021
    #6
    30854 нравится это.

Поделиться этой страницей