If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

Bulleid Pacifics - Past or Present

Rasprava u 'Steam Traction' pokrenuta od 34007, 13. Svibanj 2008..

  1. MellishR

    MellishR Resident of Nat Pres Friend

    Pridružen(a):
    16. Travanj 2009.
    Poruka:
    8,997
    Lajkova:
    5,922
    Thank you. In the words of Eccles "You learn something new every day".
     
    paullad1984 se sviđa ovo.
  2. Flying Phil

    Flying Phil Part of the furniture

    Pridružen(a):
    10. Prosinac 2018.
    Poruka:
    3,045
    Lajkova:
    6,450
    Spol:
    Muškarac
    Grad:
    Leicestershire
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    That pendulum lever is an elegant solution but it does mean that the valve rod end is unsupported and, I was told by a fitter years ago, that keeping that end gland steam tight was a bit of a problem. He said that he would much prefer to have had slide bars for support. Was this just a "One - off" comment?
     
  3. Jamessquared

    Jamessquared Nat Pres stalwart

    Pridružen(a):
    8. Ožujak 2008.
    Poruka:
    28,028
    Lajkova:
    65,609
    Grad:
    LBSC 215
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    I think the issue might be less to do with support, and more than on a Bulleid, the valves are outside admission, i.e. the gland is on the high-pressure (inlet) side, not the low pressure (exhaust) side. The Maunsell Q has the same issue.

    Tom
     
    Steve se sviđa ovo.
  4. RLinkinS

    RLinkinS Member

    Pridružen(a):
    8. Studeni 2008.
    Poruka:
    984
    Lajkova:
    973
    Spol:
    Muškarac
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    That is a neat and very well designed solution, thanks for the picture.

    Sent from my SM-A105FN using Tapatalk
     
  5. RLinkinS

    RLinkinS Member

    Pridružen(a):
    8. Studeni 2008.
    Poruka:
    984
    Lajkova:
    973
    Spol:
    Muškarac
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    A further point point is that the valve guide arrangement parents any vertical forces from the radius rod and combination lever being transmitted to the valve spindle. The pendulum lever arrangement absorbs those forces so the vertical load on the valve spindle must be quite small.

    Sent from my SM-A105FN using Tapatalk
     
    S.A.C. Martin, Steve i Jamessquared se sviđa ovo.
  6. Flying Phil

    Flying Phil Part of the furniture

    Pridružen(a):
    10. Prosinac 2018.
    Poruka:
    3,045
    Lajkova:
    6,450
    Spol:
    Muškarac
    Grad:
    Leicestershire
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Has there been any movement of Manston? I believe it was due to go to Herston in early December?
     
  7. Sunnieboy

    Sunnieboy New Member

    Pridružen(a):
    25. Veljača 2012.
    Poruka:
    105
    Lajkova:
    159
    Spol:
    Muškarac
    Interesi:
    Retired
    Grad:
    Swanage
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Almost ready to move, maybe before but certainly immediately after Christmas

    Sent from my SM-T820 using Tapatalk
     
  8. Flying Phil

    Flying Phil Part of the furniture

    Pridružen(a):
    10. Prosinac 2018.
    Poruka:
    3,045
    Lajkova:
    6,450
    Spol:
    Muškarac
    Grad:
    Leicestershire
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Thanks Sunnieboy, is there any new information about Manston?
     
  9. Sunnieboy

    Sunnieboy New Member

    Pridružen(a):
    25. Veljača 2012.
    Poruka:
    105
    Lajkova:
    159
    Spol:
    Muškarac
    Interesi:
    Retired
    Grad:
    Swanage
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Should be arriving at Herston Thursday. More work

    Sent from my SM-T820 using Tapatalk
     
  10. daveb

    daveb Member

    Pridružen(a):
    5. Rujan 2005.
    Poruka:
    945
    Lajkova:
    484
    Spol:
    Muškarac
    Grad:
    Wimborne, Dorset
    Heritage Railway Volunteer:
    No I do not currently volunteer
    There are some pictures on Facebook (not mine) showing that it did arrive back at Herston today.
     
  11. 5944

    5944 Resident of Nat Pres

    Pridružen(a):
    14. Siječanj 2006.
    Poruka:
    8,988
    Lajkova:
    9,517
    Spol:
    Muškarac
    Interesi:
    Train Maintainer for GTR at Hornsey
    Grad:
    Letchworth
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Rail Advent (yes, yes, I know) are reporting 34067 will haul the Northern Belle on Thursday 24th February.
     
  12. green five

    green five Resident of Nat Pres

    Pridružen(a):
    30. Travanj 2006.
    Poruka:
    6,815
    Lajkova:
    2,717
    Spol:
    Muškarac
    Interesi:
    Design Draughtsman
    Grad:
    Hampshire
    Heritage Railway Volunteer:
    No I do not currently volunteer
  13. Big Al

    Big Al Nat Pres stalwart Staff Member Moderator

    Pridružen(a):
    30. Svibanj 2009.
    Poruka:
    22,738
    Lajkova:
    22,894
    Grad:
    1016
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Logical as West Coast needs an air brake loco to operate the train. Whilst they are a vacuum steam company their business head will tell them that they need air as an alternative.
     
  14. martin1656

    martin1656 Nat Pres stalwart Friend

    Pridružen(a):
    8. Prosinac 2014.
    Poruka:
    19,425
    Lajkova:
    12,626
    Spol:
    Muškarac
    Grad:
    St Leonards
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Be interesting to see if they send her out with full Golden Arrow regalia for some of these trains,
     
  15. torgormaig

    torgormaig Part of the furniture Friend

    Pridružen(a):
    17. Srpanj 2007.
    Poruka:
    4,963
    Lajkova:
    7,749
    That's a bit unoriginal these days don't you think. However a Bulleid 1950s style Northern Belle headboard would be good in my opinion.

    Peter
     
  16. 30854

    30854 Resident of Nat Pres

    Pridružen(a):
    8. Ožujak 2017.
    Poruka:
    12,172
    Lajkova:
    11,496
    Spol:
    Muškarac
    Interesi:
    Retired
    Grad:
    Brighton&Hove
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Are the 'originals' allowed on the line to Fort William and Mallaig?
     
  17. twr12

    twr12 Well-Known Member

    Pridružen(a):
    2. Rujan 2007.
    Poruka:
    1,663
    Lajkova:
    830
    Could be. They are the same gauge envelope as LMS class 5s.
     
  18. torgormaig

    torgormaig Part of the furniture Friend

    Pridružen(a):
    17. Srpanj 2007.
    Poruka:
    4,963
    Lajkova:
    7,749
    I have no idea. They may well fit, but you can imagine the adhesion problems they may well encounter if you were to try it.

    Peter
     
    paullad1984 se sviđa ovo.
  19. Spamcan81

    Spamcan81 Nat Pres stalwart

    Pridružen(a):
    25. Kolovoz 2007.
    Poruka:
    35,925
    Lajkova:
    22,445
    Interesi:
    Training moles
    Grad:
    The back of beyond
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Tender first up through Beasdale would be fun.
     
    torgormaig, green five i 5944 se sviđa ovo.
  20. Johnb

    Johnb Nat Pres stalwart

    Pridružen(a):
    3. Prosinac 2014.
    Poruka:
    15,678
    Lajkova:
    18,651
    Spol:
    Muškarac
    Interesi:
    Retired, best job I've ever had
    Grad:
    Buckinghamshire
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    They may be but are totally unsuitable. The Mallaig road knocks hell out of any engine. The oil bath welded to the frames might spring a few leaks and the climb up the Glenfinnan Summit eastbound would be interesting
     
    torgormaig and paullad1984 like this.

Podijelite ovu stranicu