If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

A2 60532 Blue Peter

Discussion in 'Steam Traction' started by big.stu, Nov 3, 2014.

  1. Sam 60103

    Sam 60103 Member

    Joined:
    Mar 9, 2019
    Messages:
    926
    Likes Received:
    342
    Location:
    Kirkcaldy
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Apologies if any inconvenience caused.
     
  2. class8mikado

    class8mikado Part of the furniture

    Joined:
    Jun 1, 2009
    Messages:
    3,609
    Likes Received:
    1,438
    Occupation:
    Print Estimator/ Repository of Useless Informatio.
    Location:
    Bingley W.Yorks.
    Heritage Railway Volunteer:
    No I do not currently volunteer
    In this respect is the multiple valve regulator necessary ? an improvement ?
     
  3. Sidmouth

    Sidmouth Resident of Nat Pres Staff Member Moderator

    Joined:
    Sep 12, 2005
    Messages:
    9,634
    Likes Received:
    8,302
    Gender:
    Male
    Location:
    Alderan !
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Has Jeremy passed ? I thought he was still with us
     
  4. black5

    black5 Well-Known Member

    Joined:
    Apr 1, 2006
    Messages:
    1,911
    Likes Received:
    2,467
    Occupation:
    Theatre
    Location:
    Merseyside>Bury
    Heritage Railway Volunteer:
    Yes I am an active volunteer
  5. Sidmouth

    Sidmouth Resident of Nat Pres Staff Member Moderator

    Joined:
    Sep 12, 2005
    Messages:
    9,634
    Likes Received:
    8,302
    Gender:
    Male
    Location:
    Alderan !
    Heritage Railway Volunteer:
    Yes I am an active volunteer
  6. Steve

    Steve Resident of Nat Pres Friend

    Joined:
    Oct 7, 2006
    Messages:
    11,930
    Likes Received:
    10,088
    Occupation:
    Gentleman of leisure, nowadays
    Location:
    Near Leeds
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Probably, especially at low openings . I just remember it was quite a pull on the lever to get the regulator open wide and winding the reverser back made things easier, as on other locos. It would be interesting to hear from others who have experience of them. Which locos have them these days? The 60532, Britannias(?), and 71000? Not sure about 60163. Any more?
    Another factor in the notorious slip was that the fireman's side regulator handle had been removed for supposedly safety reasons. It would have been much easier to shut the regulator if it had been present.
     
    60525 likes this.
  7. Richard Roper

    Richard Roper Well-Known Member

    Joined:
    May 22, 2006
    Messages:
    1,310
    Likes Received:
    1,355
    Gender:
    Male
    Occupation:
    Librarian
    Location:
    Just up the road from 56E Sowerby Bridge
    Heritage Railway Volunteer:
    No I do not currently volunteer
    I never knew that. That's certainly very "interesting".

    Richard.
     
  8. 5944

    5944 Resident of Nat Pres

    Joined:
    Jan 14, 2006
    Messages:
    8,031
    Likes Received:
    7,605
    Gender:
    Male
    Occupation:
    Train Maintainer for GTR at Hornsey
    Location:
    Letchworth
    Heritage Railway Volunteer:
    No I do not currently volunteer
    60009 has had its fireman's side regulator handle removed as well, allegedly due to a couple of support crew hitting their heads on it in the past.
     
  9. Matt37401

    Matt37401 Nat Pres stalwart

    Joined:
    Jun 8, 2014
    Messages:
    15,326
    Likes Received:
    11,662
    Occupation:
    Nosy aren’t you?
    Location:
    Nowhere
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Call me ignorant but was this common practice (a regulator on the fireman’s side)
    I could understand on something like a shunting engine but on an express passenger engine?
    Or is it just an LNER thing?
     
  10. torgormaig

    torgormaig Part of the furniture Friend

    Joined:
    Jul 17, 2007
    Messages:
    4,440
    Likes Received:
    6,546
    Not that unusual. We are only talking about the regulator handle. All the other driver's controls are on his side. If you have a stiff regulator it can be handy if the fireman can assist in opening or closing it.
    Here is the arrangement on the Southern U Class, 31806, as a typical example IMG_2527_edited copy.jpg

    Peter
     
  11. Johnb

    Johnb Nat Pres stalwart

    Joined:
    Dec 3, 2014
    Messages:
    14,315
    Likes Received:
    16,391
    Gender:
    Male
    Occupation:
    Retired, best job I've ever had
    Location:
    Buckinghamshire
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    It was an LNER thing with their pull out regulators. I believe the original Bulleid Pacifics had the same arrangement (Bulleid was an ex LNER man).
    Some other railways had a regulator with a sort of double handle as in Peter’s picture.
    I understand that when new out of the works the Gresley regulator could be very stiff in the gland. When new the A4 ‘Dominions’ were named at Kings Cross by the High Commissioner who was then invited to drive the loco to the end of the platform. I think it was Dominion of Canada where the HC tugged at the regulator and only moved it a fraction, Gresley urged him to pull it harder and he did, fully open on the big valve with the inevitable result. The fireman quickly dived for the handle his side and snapped it shut.
     
    60525 and Matt37401 like this.
  12. Jamessquared

    Jamessquared Nat Pres stalwart

    Joined:
    Mar 8, 2008
    Messages:
    26,099
    Likes Received:
    57,414
    Location:
    LBSC 215
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    “Birch Grove’s” regulator is not dissimilar - double-ended at least. That’s a Marsh boiler, and Marsh was ex-GNR: I wonder if he bought certain design ideas with him? Certainly the fire hole door on Birch Grove is very similar to an LNER “oven door” type.

    As @Steve says, notching up in order to free up a regulator to move from first to big valve is not uncommon: you have to do it on our Chatham engines. You can be going along at about 35% full first valve, but if you want more you have to pull the loco up to about 15%; nudge the regulator until second valve is cracked open, then let it back out to 35% or whatever, then open second valve as required. It's not an instantaneous process, instead a co-ordinated sequence of moves.

    And then you have the issue of closing it again! Not uncommon on some engines that to close the regulator from second valve, or move back to first valve, you first have to sharply open the regulator wide open, then slam it shut, then (if required) open it again to first valve. If you just try to shut it directly from part-open second valve, you can sometimes contrive to shut one valve but leave the other still open, so the regulator looks shut but is actually still open …

    Tom
     
    Last edited: Jun 29, 2022
    60525, Copper-capped and Steve like this.
  13. Matt37401

    Matt37401 Nat Pres stalwart

    Joined:
    Jun 8, 2014
    Messages:
    15,326
    Likes Received:
    11,662
    Occupation:
    Nosy aren’t you?
    Location:
    Nowhere
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Thanks Gents, I have a vague memory of I think it’s 47383 having a similar arrangement to the photo you’ve posted Peter, which for a shunting engine would make some sort of sense.
    For some reason now I have a recollection of the Ivatt 4’s originally having a regulator on the the Fireman’s side, which would make some sense regarding @Johnb’s post regarding who Mr Ivatt senior worked for.
    As ever every days a school day on here, thanks again chaps.
     
  14. torgormaig

    torgormaig Part of the furniture Friend

    Joined:
    Jul 17, 2007
    Messages:
    4,440
    Likes Received:
    6,546
    Alas, Matt, a double handled regulator is not much help with shunting unless you have a brake valve on the fireman's side as well. We had to wait for the advent of the diesel shunter for this to become a reality.

    Peter
     
    Matt37401 likes this.
  15. Steve

    Steve Resident of Nat Pres Friend

    Joined:
    Oct 7, 2006
    Messages:
    11,930
    Likes Received:
    10,088
    Occupation:
    Gentleman of leisure, nowadays
    Location:
    Near Leeds
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Tom has aptly described the fun and games you have with a conventional main and pilot valve regulator. Doing that is fairly easy with a screw reverser and even a lever reverse as long as you have piston valves. However, it can be even more fun with a lever reverse and slide valves where, if you try notching up with the regulator open you need to be pretty strong to do so as the steam pressure acting on the slide valve will tend to hold it stationary on the face and throw the movement back to the reverser lever. Thus it is normal practice to shut the regulator before notching up. You then have the chicken and egg situation of what to do if wanting to open the big valve. That’s when the regulator handle extension on the fireman’s side is a big help. Before piston valves became the norm there were several designs of balanced slide valves for this and other reasons.
     
    Richard Roper and 60525 like this.
  16. S.A.C. Martin

    S.A.C. Martin Part of the furniture

    Joined:
    Aug 31, 2010
    Messages:
    5,591
    Likes Received:
    9,325
    Gender:
    Male
    Occupation:
    Asset Engineer (Signalling), MNLPS Treasurer
    Location:
    London
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    To be precise it was described as a “double seated” regulator, I recollect, on the LNER. The LNER briefly toyed with replacing this with a single seat GCR pull out regulator but this was reversed quite quickly after an incident with the rebuilt Grest Northern.

    Not one of Thompsons finer design decisions, it must be said, when the double seated one was so prevalent.
     
    60525 likes this.
  17. sgthompson

    sgthompson Part of the furniture Friend

    Joined:
    Jun 12, 2008
    Messages:
    3,861
    Likes Received:
    9,238
    Gender:
    Male
    Occupation:
    Tobacco manufacturing
    Location:
    Kendal
    I remember waiting at Shap Summit for 46115 with Gordon Hodgson driving and when it went into a violent slip I thought god no not another Blue Peter but Gordon controlled it brilliantly. LMS locos are obviously different to LNER mind control wise . Not sure what Gordon actually did that day but the drain cocks are opened before it is controlled.
     
  18. Matt37401

    Matt37401 Nat Pres stalwart

    Joined:
    Jun 8, 2014
    Messages:
    15,326
    Likes Received:
    11,662
    Occupation:
    Nosy aren’t you?
    Location:
    Nowhere
    Heritage Railway Volunteer:
    No I do not currently volunteer
    From memory wasn’t it Gordon Hodgson and the late Paul Kane who were in charge of 60532 with the ‘Ayr Raider’ tour? I’m sure they were responsible for several memorable runs with Blue Peter in the late ‘90s early 2000’s
     
  19. sgthompson

    sgthompson Part of the furniture Friend

    Joined:
    Jun 12, 2008
    Messages:
    3,861
    Likes Received:
    9,238
    Gender:
    Male
    Occupation:
    Tobacco manufacturing
    Location:
    Kendal
    Not sure Matt to be honest but you’re probably right. Had a chat with Gordon the night before he took 6233 over Shap from Crewe on the Citadel tour and he did say Blue Peter was one of his favourite locos he had driven.
     
    Matt37401 likes this.
  20. iancawthorne

    iancawthorne Well-Known Member

    Joined:
    Aug 23, 2010
    Messages:
    1,739
    Likes Received:
    5,679
    Gender:
    Male
    Location:
    Brampton, Cumbria
    Paul Kane and Gordon Hodgson joint fired 60532's best effort at the Blue Riband with Willie Alexander driving. 21st March 1992.
     

Share This Page