LE movements, ECS and test runs 2025

60007 returning to Crewe on Thursday 16-10-25:
https://www.realtimetrains.co.uk/service/gb-nr:U64266/2025-10-16/detailed

 

the Duke’s brief return

A dozen years since No 71000 Duke of Gloucester last hauled a passenger, the engine was at last ready for a loaded test run after its comprehensive overhaul. The BR Class 8 Locomotive Trust generously arranged for well over 100 of its supporters to travel on a loaded test run on a circuit from Crewe.

So we all assembled on platform 12 and for a long while that was all we could do, as rumours reached us of cattle on the line at Gobowen. It was unclear whether the unit or the cows were harmed, but eventually the magnificent Duke swept into the station in its spotless Brunswick green livery, marred only by a strange headboard saying ‘The impossible dream’. Behind her were eight Mark 1s from the Saphos set and a class 57 diesel.

We were welcomed on board by the lovely steward Diamond and her male colleagues, who were to serve tea and coffee on the journey and finally, over 140 minutes late, we made a brisk start towards Chester, reaching 61 mph before Calveley and passing Beeston Castle at 65. More was to come as speed rose to 71 for several miles, only slowing at Rowton on the outskirts of Chester. We crawled towards the city and paused briefly on the middle road at the station. Then it was off again, reaching 40 by the racecourse and crossing the River Dee. Onwards in the 40s and 50s until the long steep climb through Gresford which we tackled at a steady, determined 30 mph. After Wrexham we rode on in the 50s and 60s to our intermediate stop at Shrewsbury.

Then the sun shone brightly as we progressed through the Shropshire and Staffordshire countryside. 65 near Shirnal was our fastest speed on this stretch, but on the approach to Wolverhampton we took a sharp left turn to head northwards towards the West Coast mainline. Speed soon reached 73 at Penkridge and continued around that level to the outskirts of Stafford, through which we ambled for a while. But we were back into the high sixties on the approach to Norton Bridge and up to 70 at Millmeece. This continued to a maximum of 72 beyond Madeley but then we were ambling again all the way back to Crewe. I had to remind myself that we were still running way out of path on a busy stretch of line.

It had been a wonderful experience to ride behind the Duke again, and standing beside her huge bulk in the platform provided a powerful blast for all the senses. Not to mention that distinctive chime whistle which warned us she was about to be dragged away by the diesel. Great credit to the Trust who have kept the faith through all these long years, and to Jeremy Hosking and his team for providing the means to get her back on the main line where she belongs. The Duke’s failure two days later was a massive disappointment, but I’m sure that when we look back on it in a few years time, it will seem just like a small blip before a magnificent era of mainline running by one of the finest steam locomotives ever.

PS Greetings to any old friends who are still around. Sorry I’ve been off grid for a while, but I’m still here, as the above will show!
Peter in Manchester

 

Mon. 20th October
5Z30 Crewe H.S. to Bishops Lydeard.
https://www.realtimetrains.co.uk/service/gb-nr:U68000/2025-10-20/detailed
Timed at 75 mph

Tues. 21st October
5Z31 Bishops Lydeard to Crewe H.S.
https://www.realtimetrains.co.uk/service/gb-nr:U68001/2025-10-21/detailed
Timed at 60 mph

Thanks to John and Simon C

 

https://www.realtimetrains.co.uk/service/gb-nr:U64268/2025-10-14/detailed

60103 to the moors I'm presuming

 

Any idea which way round it will be running please, and strangely it says changes to diesel in the 2 minute York stop?
Thanks in advance

 

Does it? I think it says pathed as a diesel at 60 to York and pathed as a diesel at 75 from York.

 

Chimney first as far as Battersby, then tender first, hence the reduction to 45mph.

 

Whatever the computer timing load shows, it will be limited to 60mph as loco and PO Brake.

Cheers, Neil

 

All steam workings are described as diesel - it's only the pathing speed that changes.

 

I took a chance going to York today to see 60103 Flying Scotsman going from Barrow Hill to NYMR, hoping that the signallers did not send it via the avoiding lines
https://railway-photography.smugmug.com/Days-out/2025/October-2025/60103-/i-Ktjb98r

Neil

 

44932 will move to the KWVR on Thursday this week: https://www.realtimetrains.co.uk/service/gb-nr:U64269/2025-10-16/detailed

 

As York is a fairly busy station, one might expect most movements that don't require a platform to be sent via the avoiding lines. Why isn't that done?

Edit: deleted extraneous word.

 

Only thing i can think of is that some NRM support staff needed picking up at the platform

 

Route knowledge?

 

Tornado tomorrow from North Road to East Grinstead for Bluebell steam gala

5Z63 1029 North Road to East Grinstead Sidings

https://www.realtimetrains.co.uk/service/gb-nr:U64267/2025-10-15/detailed

 

presumably this must be a DBS job?

 

Yes it is looking at the profit centre code in the train header details.
Cheers, Neil

 

@Romsey Many thanks Neil. I knew nothing about these codes but have now found a list of them, very useful.

 

Is there a problem with this move today? It has been activated but 60007 didn't make it to Alton station for the 10.21 departure. Two electric units now occupying both platforms according to Open train times.

 

I've been wondering the same. I'm at Ash Vale and have seen no movement from Gresley on real time trains.