If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

Windcutter Wagons

Discussion in 'Heritage Rolling Stock' started by Flying Phil, Dec 11, 2018.

  1. Jamessquared

    Jamessquared Nat Pres stalwart

    Joined:
    Mar 8, 2008
    Messages:
    29,813
    Likes Received:
    73,788
    Location:
    LBSC 215
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Another option is the one used on a couple of wagons at the Bluebell, which is to use a wagon sheet. The wagon itself contains a rough frame knocked up from scrap timber, which has the dual role of simulating the shape of a load, and also ensuring that the sheet doesn't sag and pool water. It does rather hide your lovely wagon though!

    [​IMG]

    (Photo source: https://www.bluebell-railway.co.uk/bluebell/wagon/5542.html)

    Tom
     
  2. pmh_74

    pmh_74 Part of the furniture

    Joined:
    Jan 28, 2009
    Messages:
    2,695
    Likes Received:
    2,186
    It's a good solution for a 'less than lovely' wagon though, and most railways can find one or two of those...
     
  3. Flying Phil

    Flying Phil Part of the furniture

    Joined:
    Dec 10, 2018
    Messages:
    3,248
    Likes Received:
    7,397
    Gender:
    Male
    Location:
    Leicestershire
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Last week saw the fixed end painted, but were are still awaiting the "W" iron to be riveted before we can put the final floor section in and get the wagon finished. We were able to get more rusty bent steel off the two wagons in the yard.
    DSCF0358.JPG DSCF0359.JPG DSCF0360.JPG
     
  4. Flying Phil

    Flying Phil Part of the furniture

    Joined:
    Dec 10, 2018
    Messages:
    3,248
    Likes Received:
    7,397
    Gender:
    Male
    Location:
    Leicestershire
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Another workday has seen #676 white stripped, black boxed and South end headstock painted...but we are still awaiting the "W" iron to be riveted.
    DSCF0376.JPG

    Outside the drawbar area in #403 has revealed a lot of rust, lacy steel and not much else!
    DSCF0379.JPG

    But it was good to see a working PW veg clearance train running through Rothley.
    DSCF0382.JPG
     
  5. Flying Phil

    Flying Phil Part of the furniture

    Joined:
    Dec 10, 2018
    Messages:
    3,248
    Likes Received:
    7,397
    Gender:
    Male
    Location:
    Leicestershire
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    There was a shunt taking place in the Rothley yard so we were not able to get a lot done between the showers! Tim and Rob were grinding off the old welds on #067.
    DSCF0409.JPG
     
    silversteellady, ghost and Johnme101 like this.
  6. Flying Phil

    Flying Phil Part of the furniture

    Joined:
    Dec 10, 2018
    Messages:
    3,248
    Likes Received:
    7,397
    Gender:
    Male
    Location:
    Leicestershire
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    A quick shout out for this months issue 352 of Heritage Railway magazine which has a six page article on the GCR freight operation. Preceding issues also covered other railways activities.
    Well Done Owen Hayward and HR for highlighting the various aspects of this part of preserved railways.
     
    silversteellady likes this.

Share This Page