If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

vale of rheidol GA drawing

Rasprava u 'Narrow Gauge Railways' pokrenuta od andysleigh, 18. Siječanj 2010..

  1. rheidol

    rheidol Member

    Pridružen(a):
    13. Veljača 2006.
    Poruka:
    343
    Lajkova:
    82
    Spol:
    Muškarac
    Interesi:
    Railwayman
    Grad:
    Aberystwyth, United Kingdom
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    You learn something new every day!
     
  2. houghtonga

    houghtonga Member

    Pridružen(a):
    22. Studeni 2007.
    Poruka:
    385
    Lajkova:
    109
    Spol:
    Muškarac
    Interesi:
    Chartered Engineer
    Grad:
    Derby
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    This topic reminds me of those Victorian photographs of Ffestiniog Railway Locomotives with footplate crews who appear to be exactly the right height to stand comfortably in the cab doorways and look as though they are about 70 when (sadly) they were probably only middle aged by todays standards.

    It is a vivid reminder of how much the understanding of nutrician and standards of living has changed since then.
     
  3. GHWood

    GHWood Member

    Pridružen(a):
    18. Lipanj 2007.
    Poruka:
    295
    Lajkova:
    63
    Thanks for that - re-enforces what the Steam Railway article said (and what seemed to have happened in pictures of number 9 - I'd wondered about that for ages.....). It does look a lot better lowered down!!

    I know this is really anorak-esque (!) question but did the BMR fit the original cab back on after overhaul (and add the 6" to it somehow) or was it a 'new build'? Ditto when it was lowered again.
     
  4. Talyllyn07

    Talyllyn07 Member

    Pridružen(a):
    19. Siječanj 2007.
    Poruka:
    332
    Lajkova:
    20
    Grad:
    Haarlem, Holland
    Hi to asnwer the question, the cab and bunkers on No.9 wrer new in 1990 I would imagine it was 1992 when it was lowered again! The only part of the bodywork that was kept were the tanks! On No.8 even the tanks were renewed all fixtures and fittings were kept though and applied to the new platework!
    Cheers
    AT
     
  5. GHWood

    GHWood Member

    Pridružen(a):
    18. Lipanj 2007.
    Poruka:
    295
    Lajkova:
    63
    Thanks for that. That's what I love about National Preservation - it doesn't matter how obscure your question, there's usually someone who knows the answer.....
     
  6. shad

    shad New Member

    Pridružen(a):
    21. Prosinac 2009.
    Poruka:
    1
    Lajkova:
    0
    Both No9 and No8 came from Brecon with new cabs 6" taller, and both were re built 3" lower back at the vor winter 1996, built taller to give more headroom but looked a bit silly. The original cabs were very low inside. facts Andy!.
     
  7. Talyllyn07

    Talyllyn07 Member

    Pridružen(a):
    19. Siječanj 2007.
    Poruka:
    332
    Lajkova:
    20
    Grad:
    Haarlem, Holland
    well there we are then!! im not as old as you are Shad to know! ;-)
     
  8. JacSGWR

    JacSGWR New Member

    Pridružen(a):
    29. Rujan 2010.
    Poruka:
    5
    Lajkova:
    0
    Interesi:
    Locomotive cleaner, Maintenance
    Grad:
    Aberystwyth, Wales
    How much do the TME Rheidol Tanks cost and are they R/C?
     
  9. tomparryharry

    tomparryharry Member

    Pridružen(a):
    11. Svibanj 2009.
    Poruka:
    385
    Lajkova:
    7
    Interesi:
    Renewable Energy
    Grad:
    Isle of Wight
    Number 9 was going thro' Brecon's shop when I was working there. I seem to recall that the platework was new.

    Hope this helps.

    Regards,
    Ian
     

Podijelite ovu stranicu