If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

Loco's coming back into service this year

Тема в разделе 'Narrow Gauge Railways', создана пользователем pjm, 30 янв 2010.

  1. DJH

    DJH Member

    Дата регистрации:
    18 авг 2009
    Сообщения:
    666
    Симпатии:
    10
    Пол:
    Мужской
    Род занятий:
    Graduate Engineer
    Адрес:
    London
    NGG 16 138 on the Welsh Highland
     
  2. pjm

    pjm New Member

    Дата регистрации:
    10 дек 2007
    Сообщения:
    183
    Симпатии:
    19
    Пол:
    Мужской
    Род занятий:
    Train Planner, Network Rail
    Адрес:
    Aylesbury
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    isn't most of it 143 eg power bogies
     
  3. AndrewT

    AndrewT Member

    Дата регистрации:
    16 окт 2007
    Сообщения:
    735
    Симпатии:
    50
    Род занятий:
    F&WHR Spin Doctor
    Адрес:
    Maentwrog
    143 was running on 138's power bogies last year. The point is all the bits are interchangeable. 140's boiler is currently up at Pete Waterman's place, but it won't go on 140 when it comes back.
     
  4. DJH

    DJH Member

    Дата регистрации:
    18 авг 2009
    Сообщения:
    666
    Симпатии:
    10
    Пол:
    Мужской
    Род занятий:
    Graduate Engineer
    Адрес:
    London
    Maybe best to say 138s boiler and frames will be back in service this year. The interchangeable parts are very useful particually given what happened with 143 as it enabled 143s failed power bogies to be replaced with 138s and so minimise disruption in time out for repair. Same has occurred with the diesel Funkeys.

    Regards
    Duncan
     
  5. Rander

    Rander Member

    Дата регистрации:
    24 фев 2007
    Сообщения:
    231
    Симпатии:
    36
    Ravenglass & Eskdale Railway's Northern Rock should be outshopped by late spring after a heavy overhaul which has taken two years. Loco has a new boiler and will more or less be a completely new engine - very little has been left untouched by the fitters, and the frames had a thorough overhaul at TMA Engineering in Birmingham.
     

Поделиться этой страницей