If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

Vale of Rheidol Engine in 7 1/4"?

Rasprava u 'Miniature Railways' pokrenuta od SimonJ5, 6. Travanj 2010..

  1. SimonJ5

    SimonJ5 New Member

    Pridružen(a):
    6. Travanj 2010.
    Poruka:
    3
    Lajkova:
    0
    I'm beginning to cast around for a new project and I do love the Vale of Rheidol 2-6-2s however I can't find any drawings for 7 1/4" gauge or even another gauge that I could scale up. I thought that there was a 3 1/2" gauge set of drawings but I cannot find them. Can anyone help?

    Thanks.

    Simon
     
    SimonJ5, 6. Travanj 2010.
    #1
  2. odc

    odc Member

    Pridružen(a):
    11. Travanj 2006.
    Poruka:
    766
    Lajkova:
    35
    Interesi:
    Network Technician at St Albans School
    Grad:
    Hemel Hempstead
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    There is one that occasionally runns at Echolls Wood, Kingsbury. Selsig, on here, has driven it and may be able to help if you PM him
     
    odc, 7. Travanj 2010.
    #2
  3. Achar2001

    Achar2001 New Member

    Pridružen(a):
    5. Travanj 2008.
    Poruka:
    157
    Lajkova:
    39
    Interesi:
    Motoring and Rail Journalist and Editor
    Grad:
    Llanfair Caereinion, Powys
    There's one in the National Railway Museum but I can't remember if its 5-inch or 71/4in.

    Andrew C
    Narrow Gauge World
     
    Achar2001, 7. Travanj 2010.
    #3
  4. Anthony Coulls

    Anthony Coulls Well-Known Member

    Pridružen(a):
    24. Travanj 2008.
    Poruka:
    1,803
    Lajkova:
    624
    It's 7 1/4" built by Harry Powell. Dennis Bates of Canley near Coventry also built one back in the 1960s which was a pioneer narrow gauge 7 1/4" loco and in a way was semi-responsible for Roger Marsh to consider building "Tinkerbell".
     
    Anthony Coulls, 7. Travanj 2010.
    #4
  5. SimonJ5

    SimonJ5 New Member

    Pridružen(a):
    6. Travanj 2010.
    Poruka:
    3
    Lajkova:
    0
    Thanks to everyone who replied - a few leads to follow up.

    Regards,

    Simon J
     
    SimonJ5, 8. Travanj 2010.
    #5

Podijelite ovu stranicu