If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

How does a diesel work ?

本贴由 ADB9680082010-05-28 发布. 版块名称: National Railway Museum

  1. ADB968008

    ADB968008 Guest

    Has the NRM ever considered sectioning a diesel locomotive in the same way as 35029, so the public can see what the insides and components are of a diesel and what makes it work ?
    I'm sure this would be quite a cheap exhibit to set up and definitely educational ?

    Say something like a scrap 47 or 37 or even a 56 sectioned and painted up ?
     
  2. there is a sectioned delltic napier engine in the great hall behind the chineese loco
     
  3. Anthony Coulls

    Anthony Coulls Well-Known Member

    注册日期:
    2008-04-24
    帖子:
    1,803
    支持:
    622
    Yes we have - and still are considering how it might be done...
     
  4. I think it's a great idea, but just imagine the sheer volume of indignant froth generated by the 'save everything' brigade, to whom the 498 preserved 31s, 37s and 47s is nowhere near enough? ;-)
     
  5. Guest

    Guest Part of the furniture Account Suspended

    注册日期:
    2005-09-08
    帖子:
    3,614
    支持:
    21
    职业:
    Occasional
    所在地:
    G C & N S
    Gimme a gas axe - you will have one imminently :thumb:
     
  6. planetpower

    planetpower Member

    注册日期:
    2006-10-12
    帖子:
    234
    支持:
    0
    职业:
    nowt
    所在地:
    East Lancs Rly Or Boston Lodge
    50033 (Run's For Cover)
     
  7. RalphW

    RalphW Nat Pres stalwart Staff Member Administrator Friend

    注册日期:
    2005-09-11
    帖子:
    36,451
    支持:
    9,911
    性别:
    职业:
    Retired-ish, Part time rail tour steward.
    所在地:
    Northwich
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Some years ago I went on a visit to a factory in Stafford called the Universal Grinding Wheel Company. One of the party pieces that they did for visiting groups was to cut a slice from an old car engine, down from the rocker box cover, cylinder head, block and crankshaft. They asked for guesses how long the 3 foot diameter cutting disc would take to get through. These ranged from a minute upwards, it took about 20 seconds, with an unbelievable noise and a shower of sparks like you've never seen before. So we have the technology just take your engine to Stafford.....
     
  8. Spamcan81

    Spamcan81 Nat Pres stalwart

    注册日期:
    2007-08-25
    帖子:
    35,843
    支持:
    22,294
    职业:
    Training moles
    所在地:
    The back of beyond
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    I'm right behind you in the queue Frank.
     
  9. I'm a little more broadminded than your average "Anything that ain't steam / diesel (delete as applicable) should be cut up, I can't stand paraffin cans / kettles (again, delete as applicable)" type.

    However, I think there are plenty more than enough preserved class 31s, 37s and 47s up and down the country and sectioning one in the NRM would be an excellent educational exhibit.

    Why not do the same with a scrap 86 or 87?
     
  10. Oakfield

    Oakfield Guest

    Even to explain the basics of the engine itself this would not be typical, the Deltic engine being a two stroke Diesel.
     
  11. Stewie Griffin

    Stewie Griffin Member

    注册日期:
    2009-02-03
    帖子:
    398
    支持:
    5
    Take it to Stafford and half the engine will go missing anyway...!
     
  12. ADB968008

    ADB968008 Guest

    Most diesels have a corridor through them on an outside edge.. take all the paneling off that side.
    Then colour code the major components / section them accordingly.
    Remove the paneling off one of the cab's and cut the desk.

    Maybe at the other end, restore the cab and have it interactive.. customers could press various control panels and have the appropriate sections light up simulating where the action would occur (going maybe onestep further and having the pistons turn etc).

    Have a PC and CGI do the rest with a console in front of the loco ?

    Some good comparisons on performance against other forms of transport (Cars, Lorries, Buses, Ship engines etc), maybe explain how the Power Unit of a diesel effectively represents the boiler of a steam locomotive and the mind shifts' between the two technologies and the benefits.
     

分享此页面