If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

DCC Decoders

Тема в разделе 'Model Railways', создана пользователем Martin Perry, 13 июл 2010.

  1. Martin Perry

    Martin Perry Nat Pres stalwart Staff Member Moderator Friend

    Дата регистрации:
    15 апр 2006
    Сообщения:
    16.551
    Симпатии:
    7.897
    Адрес:
    1012 / 60158
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Can anyone recommend an 8-pin DCC loco decoder that is a direct fit into the loco pcb (i.e. no wiring harness - am getting fed up with trying to stuff all those ******* wires inside loco bodies!)
     
  2. gz3xzf

    gz3xzf Member

    Дата регистрации:
    22 июл 2006
    Сообщения:
    318
    Симпатии:
    77
    Пол:
    Мужской
    Род занятий:
    Retired
    Адрес:
    21C142
    Heritage Railway Volunteer:
    Yes I am an active volunteer
  3. Lenz Silver Direct - just like an 8 pin Lenz Silver, but with no wires.

    I've only ever managed to fry one Lenz Silver, and I've (accidentally) tried damned hard on occasions, so that must be some kind of endorsement ;-)
     
  4. Martin Perry

    Martin Perry Nat Pres stalwart Staff Member Moderator Friend

    Дата регистрации:
    15 апр 2006
    Сообщения:
    16.551
    Симпатии:
    7.897
    Адрес:
    1012 / 60158
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Thanks for the info folks!
     
  5. eddief

    eddief Member

    Дата регистрации:
    21 апр 2006
    Сообщения:
    304
    Симпатии:
    1
    Адрес:
    Co. Durham
    I have used DP2-UK in a few locos and it is a nice decoder. Never had any problems with it (or indeed any other TCS decorder) well worth getting if your are short on space- fits inside the Bachmann 08 and pannier a treat
     

Поделиться этой страницей