If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

35028 Guildford Circular 21st January 2011

Discuție în 'What's Going On' creată de Brunel, 21 Ian 2011.

  1. osprey

    osprey Resident of Nat Pres

    Înscris:
    3 Oct 2007
    Mesaje:
    10.497
    Aprecieri primite:
    2.857
    Ocupație:
    semi-retired, currently doing R&D for my patents
    Locație:
    Halifax
    Fascinating, did,nt know these existed as well. Is there any method/system of detecting cracked wheels these days...........memories of the old wheel tappers that used to frequent stations...
     
  2. rsfaithfull

    rsfaithfull Member

    Înscris:
    13 Iun 2007
    Mesaje:
    310
    Aprecieri primite:
    0
    We get a daily e-mail from Network Rail for any activations of the wheelchex equipment at Queenstown Road - helps us plan work for the lathe. Vary rare for one this bad though. The offending coach should be on the back of a lorry heading for Wimbledon lathe as we speak.
     
  3. osprey

    osprey Resident of Nat Pres

    Înscris:
    3 Oct 2007
    Mesaje:
    10.497
    Aprecieri primite:
    2.857
    Ocupație:
    semi-retired, currently doing R&D for my patents
    Locație:
    Halifax
    Is it an underfloor lathe? Which manufacturer?
     
  4. Dan Hamblin

    Dan Hamblin Part of the furniture

    Înscris:
    27 Mar 2006
    Mesaje:
    2.549
    Aprecieri primite:
    190
    Ocupație:
    Rolling Stock Engineer
    Locație:
    Kent
    D'oh! WheelChex - now I remember the proper name for the kit used by NR!!

    Could do with something similar on the Underground.

    Regards,

    Dan
     
  5. Phil K

    Phil K Member

    Înscris:
    8 Sep 2005
    Mesaje:
    614
    Aprecieri primite:
    77
    Locație:
    Ewell, Surrey
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Indeed it is, just overtook it on the A3 but was parked up at Cobham. Only caught a sideways glance but name seemed no be "LUN-"
     
  6. Steve from GWR

    Steve from GWR Well-Known Member

    Înscris:
    18 Feb 2010
    Mesaje:
    1.292
    Aprecieri primite:
    14
    Either IONE or LUCILLE I guess, I will have another look at my video
     
  7. Phil K

    Phil K Member

    Înscris:
    8 Sep 2005
    Mesaje:
    614
    Aprecieri primite:
    77
    Locație:
    Ewell, Surrey
    Heritage Railway Volunteer:
    No I do not currently volunteer
    It was definitely 4 letters so I'll go with IONE, cheers for confirming it for me.
     
  8. Steve from GWR

    Steve from GWR Well-Known Member

    Înscris:
    18 Feb 2010
    Mesaje:
    1.292
    Aprecieri primite:
    14
    Most likely is, I had another run through my video footage for the day before and it did seem to be IONE making the racket on the rails.
     
  9. rsfaithfull

    rsfaithfull Member

    Înscris:
    13 Iun 2007
    Mesaje:
    310
    Aprecieri primite:
    0
    It is an underfloor lathe made by Hegenscheidt. It's pretty old now though, but we used it to turn 35028 & support coach last February and her support coach again last November.

    It's definately Ione we've got here.
     
  10. green five

    green five Resident of Nat Pres

    Înscris:
    30 Apr 2006
    Mesaje:
    6.788
    Aprecieri primite:
    2.629
    Sex:
    Masculin
    Ocupație:
    Design Draughtsman
    Locație:
    Hampshire
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Now on the road to recovery Steve. Thanks for that.
     
  11. Mikem

    Mikem Member

    Înscris:
    12 Iul 2007
    Mesaje:
    292
    Aprecieri primite:
    1
    Locație:
    Guildford, Surrey
    Yes it definately is IONE iv'e just checked my footage in the snow 21.12.2010 close up at Wandsworth Town.

    Mike M. ( 70c )
     

Distribuie pagina asta