If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

Bulleid Steam Reverser.

Rasprava u 'Steam Traction' pokrenuta od 73087, 10. Veljača 2011..

  1. 73087

    73087 New Member

    Pridružen(a):
    22. Ožujak 2009.
    Poruka:
    171
    Lajkova:
    0
    Does anyone have any photographs of the business end of a Bulleid Steam Reverser i.e. the unit under the cladding?

    Was the reverser unit specifically designed for the Bulleid Pacifics or was the design taken from another class of locomotive?

    Thanks once again.
     
  2. buseng

    buseng Part of the furniture

    Pridružen(a):
    9. Rujan 2005.
    Poruka:
    4,801
    Lajkova:
    349
    Spol:
    Muškarac
    Interesi:
    Retired
    Grad:
    Tilehurst, Reading, Berks.
    This link has already been posted in the Bulleid chain driven valve gear thread, but here it is again.
    http://www.bulleidsociety.org/21C123/21C123_Valve_Gear.html
     
  3. 73087

    73087 New Member

    Pridružen(a):
    22. Ožujak 2009.
    Poruka:
    171
    Lajkova:
    0
    Thanks Buseng, I should have planned better and done the chain driven valve gear and steam reverser as one thread!. I have that diagram but would very much like some photographs of an actual unit as well. I have just spoken to someone from the Bulleid Society so hopefully something will materialize, if so I will post it.
     
  4. odc

    odc Member

    Pridružen(a):
    11. Travanj 2006.
    Poruka:
    765
    Lajkova:
    35
    Interesi:
    Network Technician at St Albans School
    Grad:
    Hemel Hempstead
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    The Q1 also had a steam reverser, don't forget, which is a bit more accessible if you go for a look at York
     
  5. 73087

    73087 New Member

    Pridružen(a):
    22. Ožujak 2009.
    Poruka:
    171
    Lajkova:
    0
    Good point, I had completely overlooked C1.
     
  6. Jamessquared

    Jamessquared Nat Pres stalwart

    Pridružen(a):
    8. Ožujak 2008.
    Poruka:
    27,793
    Lajkova:
    64,460
    Grad:
    LBSC 215
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    HAV Bulleid writes in his book:

    And in DW Winkworth's book, he quotes an engineman thus:

    Tom
     
  7. Eightpot

    Eightpot Resident of Nat Pres Friend

    Pridružen(a):
    10. Kolovoz 2006.
    Poruka:
    8,340
    Lajkova:
    2,506
    Spol:
    Muškarac
    Interesi:
    Engineer Emeritus
    Grad:
    Aylesbury
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    I suggest that it is a good bet that the above mentioned engineman didn't have to maintain them, let alone work in the oil bath!
     
  8. chilldude111

    chilldude111 New Member

    Pridružen(a):
    17. Siječanj 2009.
    Poruka:
    47
    Lajkova:
    1
    Does the T9 have a steam reverser? Or have i heard that wrong?
     
  9. twr12

    twr12 Well-Known Member

    Pridružen(a):
    2. Rujan 2007.
    Poruka:
    1,658
    Lajkova:
    820
    Original Bulleid valve gear is quite easy to maintain, so long as you are thin! Oh, and you make sure that water doesn't get in the sump oil by any of the usual means: rain, leaking injector delivery pipes or blowing inside cylinder piston rod gland.
    Equally, the steam reverser is reliable if you maintain it, like changing the piston seals in the oil cylinder at the first sign of trouble.
     
  10. twr12

    twr12 Well-Known Member

    Pridružen(a):
    2. Rujan 2007.
    Poruka:
    1,658
    Lajkova:
    820
    Yes it does. Its the same as the one on 30053, but mounted vertically and quite visible.
     

Podijelite ovu stranicu