If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

Snibston Colliery

Dieses Thema im Forum 'Everything Else Heritage' wurde von dace83 gestartet, 17 November 2011.

  1. dace83

    dace83 Well-Known Member

    Registriert seit:
    7 Mai 2007
    Beiträge:
    2.095
    Zustimmungen:
    4
    Well worth the visit, run the odd steam special


    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  2. THE MELTER

    THE MELTER Member

    Registriert seit:
    31 Oktober 2006
    Beiträge:
    422
    Zustimmungen:
    63
    Beruf:
    ENGINEER
    Ort:
    BLACK COUNTRY
    Do they have a Loco? or do they rely on visiting motive power?

    The Melter
     
  3. Anthony Coulls

    Anthony Coulls Well-Known Member

    Registriert seit:
    24 April 2008
    Beiträge:
    1.803
    Zustimmungen:
    622
    My old toy box! There's a working Hunslet 0-6-0DH, a Ruston 48DS, and static, Hunslet Austerity "Cadley Hill No.1" and RSH "Mars II", plus on the museum gallery a Brush saddle tank and Barclay fireless. Usually steam brought in once a year - the last two years have been Chasewater engines, surprised you've not taken Colin, Keith?
     
  4. Rlangham

    Rlangham Well-Known Member

    Registriert seit:
    30 September 2005
    Beiträge:
    1.074
    Zustimmungen:
    10
    Ort:
    Here
    Last time I visited, at the Transport Weekend back in May, they had a Barclay in NCB colours from the Chasewater operating. The 1906 built Brush saddle tank was formerly owned by the GWR and has the familiar copper safety valve cover. They also have a very nice 1915 Marshall traction engine which was brought out for the day
     
  5. I. Cooper

    I. Cooper Member

    Registriert seit:
    5 Februar 2011
    Beiträge:
    593
    Zustimmungen:
    751
    Ort:
    Salop
    If you're not careful you'll have Mr. Coulls in tears reminising over times with "Jingling Geordie".

    [​IMG]

    ...alas, time moves on, but perhaps one day we'll see it out again.
     
  6. Robert Heath No.6

    Robert Heath No.6 Well-Known Member

    Registriert seit:
    25 August 2009
    Beiträge:
    1.535
    Zustimmungen:
    115
    Fantastic site, a few of my efforts here.

    If I'm not mistaken, that Brush 0-4-0 is remarkably similar to Robert Heath No.6 - what I'd give to hear a pair of them in steam! :lol:
     
  7. Anthony Coulls

    Anthony Coulls Well-Known Member

    Registriert seit:
    24 April 2008
    Beiträge:
    1.803
    Zustimmungen:
    622
    George, you're right - the Heath design was heavily influenced by Hughes/Falcon/Brush locos - and back in 1999, we put the two side by side at Snibston and even did dummy double headers. If I can find the prints, I'll scan them.

    As for Mr Cooper's post above - the laptop is now flooded...it's now over 10 years since I left there...
     
  8. Avonside1563

    Avonside1563 Well-Known Member

    Registriert seit:
    13 Juli 2007
    Beiträge:
    1.141
    Zustimmungen:
    244
    Geschlecht:
    männlich
    Ort:
    Bolton's Sidings, just behind the running shed!
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    I well remember the charter at Snibston with the Heath and the conversation then Anthony regarding the Brush loco and restoring it to steam (or not!). The highlight was definitely putting everything to bed at the end of the day, shunting a colliery yard in the dark and a few spots of rain falling!
     
  9. Anthony Coulls

    Anthony Coulls Well-Known Member

    Registriert seit:
    24 April 2008
    Beiträge:
    1.803
    Zustimmungen:
    622
    Yes it was wet...and the shunt was indeed the highlight. I have a framed photo of the Heath & Brush at night on my desk.

    Checked the IRS North Staffs handbook last night and the Heaths were all copied off an 1885 Falcon 0-4-0 on the company's books at the time.
     
  10. THE MELTER

    THE MELTER Member

    Registriert seit:
    31 Oktober 2006
    Beiträge:
    422
    Zustimmungen:
    63
    Beruf:
    ENGINEER
    Ort:
    BLACK COUNTRY
    Thanks Anthony, i knew of the visits, but i never did know of the collection there i have never been, as for Colin i am waiting for a particular invite LOL.

    The Melter
     

Die Seite empfehlen