If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

Big Bertha- a few questions

Dieses Thema im Forum 'Steam Traction' wurde von Jordan-Leeds gestartet, 1 Dezember 2011.

  1. Allan Thomson

    Allan Thomson New Member

    Registriert seit:
    21 November 2011
    Beiträge:
    161
    Zustimmungen:
    13
    I always think Full length Smoke Deflectors generally improve the look of some locomotives (they just don't look right without them - eg Duchesses minus streamlining, 9f's, etc...) not a big fan of the continental style ones like the Scotsman had.....lights the blue touchpaper and runs away.....

    Incidentally that headlight doesn't (to my eyes) look like the one depicted in the images of Big Bertha. Did Bertha aquire a different headlight later?
     
  2. std tank

    std tank Part of the furniture

    Registriert seit:
    20 September 2005
    Beiträge:
    3.927
    Zustimmungen:
    1.070
    Geschlecht:
    männlich
    Beruf:
    Retired
    Ort:
    Liverpool
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Indeed, the headlight in the photo is not the one that was fitted to 58100 and 92079.
     
  3. Steve

    Steve Resident of Nat Pres Friend

    Registriert seit:
    7 Oktober 2006
    Beiträge:
    12.734
    Zustimmungen:
    11.853
    Beruf:
    Gentleman of leisure, nowadays
    Ort:
    Near Leeds
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Super D's have flangeless intermediate coupled wheels. Does that fit your pattern?:eek:hwell:
     
  4. MarkinDurham

    MarkinDurham Well-Known Member

    Registriert seit:
    4 Mai 2007
    Beiträge:
    2.229
    Zustimmungen:
    999
    Ort:
    Durham
    Not a ten-coupled, is it? :p . Anyway, that probably means no main line return for the Super D either...

    Interesting point though - what other locomotives are there out there with flangeless drivers?

    Mark
     
  5. GOLDTHORN

    GOLDTHORN New Member

    Registriert seit:
    19 September 2012
    Beiträge:
    2
    Zustimmungen:
    6
    Beruf:
    ENGINEER - PRECISION ENGINEERING MANUFACTURE
    Ort:
    BRIDGNORTH
    Many years ago I lived and went to school in Bromsgrove in the 1950`s and regulaly visited Big Bertha either at the coaling stage just below Bromsgrove station or watched her in action half way up `the Lickey`.

    Recently I have been doing a bit of research at NRM and from them I obtained the build sheets.

    Several interesting things : this engine was designed by James Clayton in 1914 , who had a senior position in the Derby Locomotive DO. He left the Midland shortly after for the SER.

    A lot of the drawings were issued to the shops in 1914 / 15 and then work on it was presumably halted for the duration of the war, re- commencing in 1919 and it entered traffic in early 1920.

    James Clayton also designed the S & D 2-8-0 , built at Derby in 1913, whose driving wheels, springs, axle boxes and motion was used on Big Bertha. Only one drawing number is shown for all the driving wheels, so maybe the centre drivers WERE flanged ? The diameter is 4` - 7 1/2``on the tread .

    Many of the special drawings ( including the cylinder ) survive for this unique engine at NRM - I am awaiting copies.

    It was a sad day in 1956 at Bromsgrove when Big Bertha departed for Derby for the last time.

    MARK.


     
  6. Lingus

    Lingus New Member

    Registriert seit:
    27 März 2009
    Beiträge:
    144
    Zustimmungen:
    3
    4 ft 7 1⁄2 in (1.410 m)
     
  7. The Decapod

    The Decapod New Member

    Registriert seit:
    27 August 2010
    Beiträge:
    125
    Zustimmungen:
    6
    :happy:
     

Die Seite empfehlen