If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

S160 on the move...

本贴由 ADB968008 于 2013-03-12 发布. 版块名称: Steam Traction

  1. ADB968008

    ADB968008 Guest

    Driving down the M6 yesterday passed CVR's S160.. 6046's tender heading south..

    is it going anywhere interesting ?
     
    ADB968008, 2013-03-12
    #1
  2. Paul.Uni

    Paul.Uni Well-Known Member

    注册日期:
    2008-08-28
    帖子:
    1,453
    支持:
    673
    West Somerset for their gala
     
    Paul.Uni, 2013-03-12
    #2
  3. 61624

    61624 Part of the furniture

    注册日期:
    2006-09-27
    帖子:
    5,294
    支持:
    3,599
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Sir Lamiel was spotted heading westwards on the A303 last night - presumably bound for the same destination?
     
    61624, 2013-03-12
    #3
  4. class8mikado

    class8mikado Part of the furniture

    注册日期:
    2009-06-01
    帖子:
    3,858
    支持:
    1,656
    职业:
    Print Estimator/ Repository of Useless Informatio.
    所在地:
    Bingley W.Yorks.
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Another S160 on the move again shortly is 5820 at the KWVR.
    The Lempor exhaust is sure to arouse interest but as a couple of other s160's ( worldwide) have had 'the treatment' its not a complete Guinea pig
    The before/ after stats might raise a few eyebrows here
    Am curious about the Air brakes which are being worked on, the locomotive itself is air braked ? (cant think of many heritage lines that have Air braked stock - Presumably it has vac brakes too ?)
     
    class8mikado, 2013-04-05
    #4
  5. Ploughman

    Ploughman Part of the furniture

    注册日期:
    2008-04-01
    帖子:
    5,986
    支持:
    2,767
    职业:
    Ex a lot of things.
    所在地:
    Near where the 3 Ridings meet
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    We have some Air braked vehicles on the NYMR, mainly in the PW fleet.
     
    Ploughman, 2013-04-05
    #5
  6. marshall5

    marshall5 Part of the furniture

    注册日期:
    2010-10-26
    帖子:
    2,532
    支持:
    4,421
    所在地:
    i.o.m
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    5820 had vac brake equipment fitted soon after arriving at the KWVR from Poland so I assume this is being refitted. Obviously everything on the s.g.in Poland was air only but IIRC when first built for the USATC the S160's also had a fairly ineffective steam brake. Ray.
     
    marshall5, 2013-04-06
    #6
  7. The Black Hat

    The Black Hat Member

    注册日期:
    2010-10-07
    帖子:
    860
    支持:
    399
    职业:
    Defender of the Faith
    所在地:
    51F
    is the S160 staying at the KWVR. I am due to be there end of May and if honest, would rather something else was the engine on the duty there. Each to their own Im sure...
     
    The Black Hat, 2013-04-06
    #7
  8. class8mikado

    class8mikado Part of the furniture

    注册日期:
    2009-06-01
    帖子:
    3,858
    支持:
    1,656
    职业:
    Print Estimator/ Repository of Useless Informatio.
    所在地:
    Bingley W.Yorks.
    Heritage Railway Volunteer:
    No I do not currently volunteer
    yes it will be there (fingers crossed) but i dont think it will be in service by then...
     
    class8mikado, 2013-04-07
    #8
  9. odc

    odc Member

    注册日期:
    2006-04-11
    帖子:
    766
    支持:
    35
    职业:
    Network Technician at St Albans School
    所在地:
    Hemel Hempstead
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Each S160 that has run in the UK in recent years has had vacumn brakes fitted in different ways. The CVR two are both fully air braked but can create vacumn for the train pipe with control in a similar way to 6322/71000 and 60163 do - so air needed all the time. The ex Mid-hants engine had full vacumn but the air was retained. They operated independently and so air was not required for the loco braking (steam I think). The NYMR and KWVR engines follow this patten too.
     
    odc, 2013-04-08
    #9
  10. Steve

    Steve Resident of Nat Pres Friend

    注册日期:
    2006-10-07
    帖子:
    12,824
    支持:
    12,024
    职业:
    Gentleman of leisure, nowadays
    所在地:
    Near Leeds
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    The NYMR S160 (2253) is air for the loco brake and sanders. A vacuum ejector is provided for the train. Loco has a vac/air proportional valve. It is/was also fitted for running with air braked stock. There are thus three brake application valves: straight air brake, automatic air brake and automatic vacuum brake
     
    Steve, 2013-04-08
    #10

分享此页面