If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

Restoring Wagon Plates

Тема в разделе 'Heritage Rolling Stock', создана пользователем samtrains, 7 май 2014.

  1. samtrains

    samtrains New Member

    Дата регистрации:
    6 апр 2011
    Сообщения:
    1
    Симпатии:
    0
    Can anyone please give me some advice for restoring some BR Wagon Plates.
     
    samtrains, 7 май 2014
    #1
  2. StoneRoad

    StoneRoad Member

    Дата регистрации:
    29 окт 2009
    Сообщения:
    976
    Симпатии:
    385
    Род занятий:
    Restoration of heritage items, mainly in timber.
    Адрес:
    Haltwhistle
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    .
     
    StoneRoad, 7 май 2014
    #2
  3. pmh_74

    pmh_74 Part of the furniture

    Дата регистрации:
    28 янв 2009
    Сообщения:
    2.426
    Симпатии:
    1.712
    Wire brush and paint, what more do you need to know?
     
    pmh_74, 8 май 2014
    #3
  4. StoneRoad

    StoneRoad Member

    Дата регистрации:
    29 окт 2009
    Сообщения:
    976
    Симпатии:
    385
    Род занятий:
    Restoration of heritage items, mainly in timber.
    Адрес:
    Haltwhistle
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    If you want to repair them, that is a different situation.
    Other wise, clean off the old finish and repaint - you may need a steady hand !
     
    StoneRoad, 8 май 2014
    #4
  5. pmh_74

    pmh_74 Part of the furniture

    Дата регистрации:
    28 янв 2009
    Сообщения:
    2.426
    Симпатии:
    1.712
    I have successfully araldited a plate which was cracked in two back together, though only to use as a pattern for producing a replica.

    On the other hand I have a plate (off one of my vehicles) which someone has welded back together. It is a mess, and not suitable for anything at all; its only use is to confirm the build date.

    As well as the wire brush you may need a small screwdriver or similar for getting into the tricky corners.

    You don't need a particularly steady hand either, as the lettering is raised so quite easy to pick out in a different colour.
     
    pmh_74, 9 май 2014
    #5

Поделиться этой страницей