If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

Locomotive Front End Designs

Тема в разделе 'Steam Traction', создана пользователем ragl, 19 фев 2016.

  1. Hermod

    Hermod Well-Known Member

    Дата регистрации:
    6 май 2017
    Сообщения:
    1.117
    Симпатии:
    318
    Пол:
    Мужской
    Адрес:
    Klitmoeller,Denmark
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Can a decent front end be made for a two cylinder compound locomotive ?
    It is my sincere conviction that the ideal British Pacific will be this one:

    https://i.imgur.com/ZQjgKpG.jpg

    A 22 inch high presure cylinder on one side,a 33 low pressure inside and some degree of mass balancer on other side.

    http://thierry.stora.free.fr/pics/141tc1_1.jpg

    If fire is destructed when starting away from stop ,I will have dream of something else.
     
    Last edited: 29 июн 2018
  2. class8mikado

    class8mikado Part of the furniture

    Дата регистрации:
    1 июн 2009
    Сообщения:
    3.854
    Симпатии:
    1.655
    Род занятий:
    Print Estimator/ Repository of Useless Informatio.
    Адрес:
    Bingley W.Yorks.
    Heritage Railway Volunteer:
    No I do not currently volunteer
    :Nurse:
     
  3. Allegheny

    Allegheny Member

    Дата регистрации:
    8 май 2015
    Сообщения:
    637
    Симпатии:
    311
    Пол:
    Мужской
    Heritage Railway Volunteer:
    No I do not currently volunteer
    I would guess so, Porta proposed a three cylinder triple expansion locomotive.
     
  4. 30854

    30854 Resident of Nat Pres

    Дата регистрации:
    8 мар 2017
    Сообщения:
    12.172
    Симпатии:
    11.496
    Пол:
    Мужской
    Род занятий:
    Retired
    Адрес:
    Brighton&Hove
    Heritage Railway Volunteer:
    No I do not currently volunteer
    That's a question worth an answer.... AFAIK, the very last 2-cyl compounds (vonBorries system) operating in these islands were the Bowman Malcolm designed B&NCR 3ft gauge class S (and S1 - just an 'S' stretched by 1ft at the back) 2-4-2t & S2 (one-off 2-4-4t rebuild). The class went extinct in the early/mid 1950's.
     
    Allegheny нравится это.
  5. sir gilbert claughton

    sir gilbert claughton Well-Known Member

    Дата регистрации:
    17 янв 2017
    Сообщения:
    1.062
    Симпатии:
    511
    Пол:
    Мужской
    Род занятий:
    retired
    Адрес:
    east sussex
    Heritage Railway Volunteer:
    No I do not currently volunteer


    I would have thought an inside HP and 2 LP outside cyls would be easier to live with and sit well with the loading gauge
     
  6. Hermod

    Hermod Well-Known Member

    Дата регистрации:
    6 май 2017
    Сообщения:
    1.117
    Симпатии:
    318
    Пол:
    Мужской
    Адрес:
    Klitmoeller,Denmark
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Yes but the two cylinder scheme can be a little more efficient and maybe enough to compensate for friction in the balancing ding.Piping etc will be simpler.And it is different
     
  7. Allegheny

    Allegheny Member

    Дата регистрации:
    8 май 2015
    Сообщения:
    637
    Симпатии:
    311
    Пол:
    Мужской
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Being different usually isn't an advantage:)
     
  8. class8mikado

    class8mikado Part of the furniture

    Дата регистрации:
    1 июн 2009
    Сообщения:
    3.854
    Симпатии:
    1.655
    Род занятий:
    Print Estimator/ Repository of Useless Informatio.
    Адрес:
    Bingley W.Yorks.
    Heritage Railway Volunteer:
    No I do not currently volunteer
    with two big soft exhausts per revoloution, draughting could be... interesting
     
  9. MellishR

    MellishR Resident of Nat Pres Friend

    Дата регистрации:
    16 апр 2009
    Сообщения:
    8.992
    Симпатии:
    5.920
    The balancing of a two-cylinder simple is inherently worse than that of a three-cylinder loco (whether simple or compound), and one with two very different cylinders would seem to be worse still. On the other hand the Smith layout is good for balancing but, with outside LP cylinders that fit the British loading gauge, limits the available TE to about the same as a two-cylinder simple, so one begins to see some sense (though not a lot) in the Webb layout.
     
  10. Allegheny

    Allegheny Member

    Дата регистрации:
    8 май 2015
    Сообщения:
    637
    Симпатии:
    311
    Пол:
    Мужской
    Heritage Railway Volunteer:
    No I do not currently volunteer
    It has been done before. I mentioned on another thread that I'd like to see Aerolite in action.
     
  11. 240P15

    240P15 Well-Known Member

    Дата регистрации:
    1 дек 2017
    Сообщения:
    1.603
    Симпатии:
    1.593
    Пол:
    Мужской
    Адрес:
    Norway
    Heritage Railway Volunteer:
    No I do not currently volunteer

    Hi there:)

    Just a question from me, not meant as any sort of critisism
    I wonder why it`s always talks about Lempor exhaust. Why not use Kylchap? Isn`t that good enough? I`m not an technical excpert but I know that Chapelon`s world record compound locomotives 240P had such one.

    kind regards,
    Knut
     
  12. Hermod

    Hermod Well-Known Member

    Дата регистрации:
    6 май 2017
    Сообщения:
    1.117
    Симпатии:
    318
    Пол:
    Мужской
    Адрес:
    Klitmoeller,Denmark
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Exactly and that is why I ask.
    The smokebox is quite big on an A2/2 and I wonder how much harm a big volume between low pressure exhaust ports and blast nozzle will do?
     
  13. Hermod

    Hermod Well-Known Member

    Дата регистрации:
    6 май 2017
    Сообщения:
    1.117
    Симпатии:
    318
    Пол:
    Мужской
    Адрес:
    Klitmoeller,Denmark
    Heritage Railway Volunteer:
    No I do not currently volunteer
    I am not Webbing here but have one high pressure 22 inch cylinder sitting 37 inches from centerplane and driving first axle inside coupling rods.
    Britania has a 20 inch cylinder sitting 40 inches from centerplane and driving outside of coupling rods.
    Reciprocating mass will be 121% of Britania.The low pressure piston is bigger but need not be very much more heavy as maxpressure is lower..
    Balance trouble is 121% of a Britania.
    On the starboard side without cylinder we can use a counterbalancer driven from the front coupling pin like the Nord 2-8-2 tank.
    Balance can then be almost what we like or dare.A two cylinder Compound has more even torque than a common four-cylinder simple
    Stanier pacifics are next in row for improvement.
    According to Cox it had lowest steam consumption of 14.2 lbs per IHPH and best Chapelon was 11.4.My cylinders are bigger and better.
     
    Last edited: 29 июн 2018
  14. Allegheny

    Allegheny Member

    Дата регистрации:
    8 май 2015
    Сообщения:
    637
    Симпатии:
    311
    Пол:
    Мужской
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Porta published a paper describing how to design a Lempor, and made it freely available. The Kylchap was covered by patents - which have now expired- but there is little or no published information on how to design one, and I think the newer examples are basically copies of the LNER Kylchaps.
     
    andalfi1 нравится это.
  15. 30854

    30854 Resident of Nat Pres

    Дата регистрации:
    8 мар 2017
    Сообщения:
    12.172
    Симпатии:
    11.496
    Пол:
    Мужской
    Род занятий:
    Retired
    Адрес:
    Brighton&Hove
    Heritage Railway Volunteer:
    No I do not currently volunteer
    A couple of billion years of adaptive evolution suggests that may not be the whole story. :D
     
    flying scotsman123 нравится это.
  16. Allegheny

    Allegheny Member

    Дата регистрации:
    8 май 2015
    Сообщения:
    637
    Симпатии:
    311
    Пол:
    Мужской
    Heritage Railway Volunteer:
    No I do not currently volunteer
    That's why I said "usually":)
     
  17. 30854

    30854 Resident of Nat Pres

    Дата регистрации:
    8 мар 2017
    Сообщения:
    12.172
    Симпатии:
    11.496
    Пол:
    Мужской
    Род занятий:
    Retired
    Адрес:
    Brighton&Hove
    Heritage Railway Volunteer:
    No I do not currently volunteer
    'Usually' you say? How much more 'usually' does it get than what the entire planet's been doing constantly since at least the end of the Late Heavy Bombardment?
    teeth-life-of-brian.jpg.cf.jpg
    (Image lifted from 'themoviegourmet.com')

    ........ I can keep this up indefinitely! ;)
     
    flying scotsman123 нравится это.
  18. Allegheny

    Allegheny Member

    Дата регистрации:
    8 май 2015
    Сообщения:
    637
    Симпатии:
    311
    Пол:
    Мужской
    Heritage Railway Volunteer:
    No I do not currently volunteer
    There have been vastly more cases of when being different has been a disadvantage!:Arghh:;)
     
    Jamessquared нравится это.
  19. 30854

    30854 Resident of Nat Pres

    Дата регистрации:
    8 мар 2017
    Сообщения:
    12.172
    Симпатии:
    11.496
    Пол:
    Мужской
    Род занятий:
    Retired
    Адрес:
    Brighton&Hove
    Heritage Railway Volunteer:
    No I do not currently volunteer
    ..... just not for very long! :)

    As the flight computer on a starliner in a derelict spaceport on a ruined world had it "The statistical probability is that other civilisations will arise and there will again be lemon-soaked paper napkins .... in the meantime, there will be a short delay until our flight inventory is complete .... please return to your seats". (H2G2)
     
  20. Allegheny

    Allegheny Member

    Дата регистрации:
    8 май 2015
    Сообщения:
    637
    Симпатии:
    311
    Пол:
    Мужской
    Heritage Railway Volunteer:
    No I do not currently volunteer
    I agree with you on that one!

    The probability of a random differece being better than the original is pretty small!
     

Поделиться этой страницей