If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

Cumbrian Coast Express 2024

Discuție în 'What's Going On' creată de sgthompson, 1 Iun 2024.

  1. ssk2400

    ssk2400 New Member

    Înscris:
    14 Noi 2010
    Mesaje:
    180
    Aprecieri primite:
    40
    Sex:
    Masculin
    Ocupație:
    electrical engineer
    Locație:
    South cumbria
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Just a question how do they control the diesel on the back who tells the diesel when to do the work ? how steep is Dalton bank ? i guess you mean the climb out of Dalton towards Ulverston ? or is it the climb from Barrow to Dalton?
     
  2. sgthompson

    sgthompson Part of the furniture Friend

    Înscris:
    12 Iun 2008
    Mesaje:
    4.010
    Aprecieri primite:
    9.837
    Sex:
    Masculin
    Ocupație:
    Tobacco manufacturing
    Locație:
    Kendal
    Pretty sure they communicate via walkie talkies but others might know better. Not sure what the gradient is from Barrow via Dalton to the summit at Lindal in Furness as it’s then downhill to Ulverston .
     
  3. Big Al

    Big Al Nat Pres stalwart Staff Member Moderator

    Înscris:
    30 Mai 2009
    Mesaje:
    22.738
    Aprecieri primite:
    22.894
    Locație:
    1016
    Heritage Railway Volunteer:
    No I do not currently volunteer
    This may help
    https://www.railwaydata.co.uk/linefiles/route/?ELR=CBC1
     
    Oswald T Wistle apreciază asta.
  4. Spamcan81

    Spamcan81 Nat Pres stalwart

    Înscris:
    25 Aug 2007
    Mesaje:
    35.921
    Aprecieri primite:
    22.441
    Ocupație:
    Training moles
    Locație:
    The back of beyond
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Do put a sock in it.
     
  5. Spamcan81

    Spamcan81 Nat Pres stalwart

    Înscris:
    25 Aug 2007
    Mesaje:
    35.921
    Aprecieri primite:
    22.441
    Ocupație:
    Training moles
    Locație:
    The back of beyond
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    AFAIK the climb to Lindal summit is around 1 in 75 in each direction.
     
  6. MellishR

    MellishR Resident of Nat Pres Friend

    Înscris:
    16 Apr 2009
    Mesaje:
    8.992
    Aprecieri primite:
    5.920
    As there was a diesel on the back, should that not have been providing power for the aircon?
     
  7. Bulleid Pacific

    Bulleid Pacific Part of the furniture

    Înscris:
    14 Apr 2007
    Mesaje:
    4.033
    Aprecieri primite:
    1.101
    Ocupație:
    A Thingy...
    You might very well think that; I couldn't possibly comment as a non-engineer.
     
  8. sgthompson

    sgthompson Part of the furniture Friend

    Înscris:
    12 Iun 2008
    Mesaje:
    4.010
    Aprecieri primite:
    9.837
    Sex:
    Masculin
    Ocupație:
    Tobacco manufacturing
    Locație:
    Kendal
    Thank you. I thought it was quite a steep climb :)
     
  9. Big Al

    Big Al Nat Pres stalwart Staff Member Moderator

    Înscris:
    30 Mai 2009
    Mesaje:
    22.738
    Aprecieri primite:
    22.894
    Locație:
    1016
    Heritage Railway Volunteer:
    No I do not currently volunteer
    The Lindal summit is at MP 22. On the Ulverston side the gradient varies in the range 1 in 75 to 1 in 85 for about 2 miles but eases considerably nearer the top. From Dalton Junction at MP 24.5 the 2.5 miles are easier at around 1 in 100 with the occasional short stretch at 1 in 90. It is a very uneven climb and not straight as I recall. That doesn't help. When I had 46115 south from Carlisle with 12 on we kept a pretty steady 21/22 up to Lindal and that was from a similar speed at the junction where we had come around the Barrow avoider. On another occasion with the same loco and only 10 on we went through Barrow and therefore across the junction at around 30. It was a steady 34 slowing to 31 near the top.

    Anyway it's a tricky climb even on the recent trip where the speed at the junction should have been helpful. But the total load would definitely have needed help and clearly that help was pretty 'generous' shall we say for probable reasons that others have explained.
     
    sunstream, sgthompson și Oswald T Wistle apreciază asta.

Distribuie pagina asta