If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

Hammant & Morgan Duette

Dieses Thema im Forum 'Model Railways' wurde von brit70000 gestartet, 28 Dezember 2010.

  1. brit70000

    brit70000 Member

    Registriert seit:
    7 Juli 2007
    Beiträge:
    276
    Zustimmungen:
    33
    Hi. I've recently come by an old H&M Duette controller for my grandson's layout. On the sides of this unit there are sockets for 16V AC on one side & 12V DC on the other.
    Can anyone please tell me where I can get the correct size plugs to fit these output sockets?
    It would make a little boy (and a big one) happy if we can find the right plugs!
     
    brit70000, 28 Dezember 2010
    #1
  2. ssk2400

    ssk2400 New Member

    Registriert seit:
    14 November 2010
    Beiträge:
    180
    Zustimmungen:
    40
    Geschlecht:
    männlich
    Beruf:
    electrical engineer
    Ort:
    South cumbria
    Heritage Railway Volunteer:
    No I do not currently volunteer
    hi these are called banana plugs , places like maplins etc should stock them , the other place to try is your local music /instrument shop as these are often used as speaker plugs on old amplifiers so they may be able to help
     
    ssk2400, 28 Dezember 2010
    #2
  3. Pete Thornhill

    Pete Thornhill Resident of Nat Pres Staff Member Administrator Moderator Friend

    Registriert seit:
    24 Juli 2008
    Beiträge:
    7.774
    Zustimmungen:
    5.910
    If it is a duette then then the output should undo and then you just tighten the bare wire into it..................................................................................................................
     
    Pete Thornhill, 28 Dezember 2010
    #3
  4. ADB968008

    ADB968008 Guest

    Hornby wires fit in ok, or if you dont mind heath robinson methods.. wrap some tin foil around the bare wires and a bit of the plastic wire, it will go in fine.
     
    ADB968008, 28 Dezember 2010
    #4
  5. John Webb

    John Webb Member

    Registriert seit:
    2 März 2010
    Beiträge:
    501
    Zustimmungen:
    86
    Beruf:
    Retired
    Ort:
    St Albans, Herts
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    As I recollect, these sockets could power an additional controller and/or a unit with switches in for point operation so the plugs were actually part of the extra units.

    But 'banana plugs' should do for loose wire connections - 4mm plugs widely used for test lead connections are probably too large in diameter.
     
    John Webb, 29 Dezember 2010
    #5
  6. Pete Thornhill

    Pete Thornhill Resident of Nat Pres Staff Member Administrator Moderator Friend

    Registriert seit:
    24 Juli 2008
    Beiträge:
    7.774
    Zustimmungen:
    5.910
    That is correct.
     
    Pete Thornhill, 29 Dezember 2010
    #6
  7. Pannier Man

    Pannier Man Member

    Registriert seit:
    23 August 2007
    Beiträge:
    395
    Zustimmungen:
    67
    Geschlecht:
    männlich
    Beruf:
    Network Rail - Retired
    Ort:
    Reading
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    The two sets of terminals on the back are for the outputs to the track to control trains.
    434177626_tp.jpg
    The sockets on either end are for 12v DC (points, lighting, additional controllers etc) or 16v AC accessories. Plugs should be available from Maplin or similar outlets.
     
    Pannier Man, 29 Dezember 2010
    #7
  8. Pete Thornhill

    Pete Thornhill Resident of Nat Pres Staff Member Administrator Moderator Friend

    Registriert seit:
    24 Juli 2008
    Beiträge:
    7.774
    Zustimmungen:
    5.910
    Exactly and you can use bare wire connections by unscrewing the termimal as I said earlier. However after re reading your question then I guess you are on about the side outputs for the accesories/additional controllers. As stated you need banana plugs, you could go to maplins and pay over the odds or you could use these guys they are much cheaper - http://cpc.farnell.com/
     
    Pete Thornhill, 29 Dezember 2010
    #8
  9. brit70000

    brit70000 Member

    Registriert seit:
    7 Juli 2007
    Beiträge:
    276
    Zustimmungen:
    33

    Many thanks to all who have replied. Indeed Peter I was referring to the side outputs!
     
    brit70000, 30 Dezember 2010
    #9

Die Seite empfehlen