If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

Tornado

Discuție în 'Steam Traction' creată de Leander's Shovel, 20 Oct 2007.

  1. chrishallam

    chrishallam Well-Known Member

    Înscris:
    25 Mar 2007
    Mesaje:
    1.039
    Aprecieri primite:
    377
    Locație:
    Uk
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Quite impressive to get rivet counting on an all-welded design! \:D/
     
  2. Steve

    Steve Resident of Nat Pres Friend

    Înscris:
    7 Oct 2006
    Mesaje:
    12.732
    Aprecieri primite:
    11.847
    Ocupație:
    Gentleman of leisure, nowadays
    Locație:
    Near Leeds
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Who said it was an all welded cab?

    The cab is neither Doncaster nor Darlington! It was assembled at Grosmont on the NYMR but I cant' remember whether it is flush or snap head on the outside!.
     
  3. dace83

    dace83 Well-Known Member

    Înscris:
    7 Mai 2007
    Mesaje:
    2.095
    Aprecieri primite:
    4
  4. Sir Nigel Gresley

    Sir Nigel Gresley Member

    Înscris:
    24 Noi 2006
    Mesaje:
    881
    Aprecieri primite:
    148
    Ocupație:
    Retired Soldier of Fortune
    Locație:
    Dorset
    Rivets

    This is not just an "anorak" question:
    For those of you too young to have seen the A1's in the flesh, or who have not read the books (looked at the pictures) there is a distinct, and highly visible difference between the two (Doncaster and Darlington) batches as far as the tenders are concerned. The Darlington tenders were smooth, whereas the Doncaster ones were "knobbly", as were the cabs, to a less obvious degree, so you could tell, from a distance, where the loco was built, although some tenders got swapped towards the very end.
     
  5. southyorkshireman

    southyorkshireman Resident of Nat Pres

    Înscris:
    28 Iun 2005
    Mesaje:
    6.558
    Aprecieri primite:
    34
    Locație:
    Rotherham 41D or Metropolitan Railway boardroom
    Didn't Darlo paint the cylinder covers differently as well?
     
  6. dace83

    dace83 Well-Known Member

    Înscris:
    7 Mai 2007
    Mesaje:
    2.095
    Aprecieri primite:
    4
    i very much doubt they would do an open day at carnforth then :smt010
     
  7. Sheff

    Sheff Resident of Nat Pres

    Înscris:
    21 Apr 2006
    Mesaje:
    8.059
    Aprecieri primite:
    3.138
    Sex:
    Masculin
    Ocupație:
    Retired Engineer & Heritage Volunteer
    Locație:
    N Warks
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Eh?
     
  8. dace83

    dace83 Well-Known Member

    Înscris:
    7 Mai 2007
    Mesaje:
    2.095
    Aprecieri primite:
    4
  9. Sir Nigel Gresley

    Sir Nigel Gresley Member

    Înscris:
    24 Noi 2006
    Mesaje:
    881
    Aprecieri primite:
    148
    Ocupație:
    Retired Soldier of Fortune
    Locație:
    Dorset
    'fraid not, 60014 was scrapped!


    As an afterthought, wouldn't it be nice if the surviving Class 60 diesels were to receive the names of their steam predecessors.
     
  10. Sir Nigel Gresley

    Sir Nigel Gresley Member

    Înscris:
    24 Noi 2006
    Mesaje:
    881
    Aprecieri primite:
    148
    Ocupație:
    Retired Soldier of Fortune
    Locație:
    Dorset
    In LNER days, Darlington stuck to the NER tradition of painting the cylinder covers green (on green locos), and their shade of green was adopted as LNER standard.

    The first Darlington-built A1, 60130 was completed in September 1948, and although it appeared in LNER green, with BRITISH RAILWAYS on the tender, its cylinder covers were black! It was named KESTREL in July 1950, and was painted BR blue at the same time. It received its final livery of BR green in January 1952.
     
  11. guycarr360

    guycarr360 Part of the furniture

    Înscris:
    4 Oct 2005
    Mesaje:
    4.834
    Aprecieri primite:
    3.159
    Sex:
    Masculin
    Locație:
    Chester le Street County Durham
  12. Sir Nigel Gresley

    Sir Nigel Gresley Member

    Înscris:
    24 Noi 2006
    Mesaje:
    881
    Aprecieri primite:
    148
    Ocupație:
    Retired Soldier of Fortune
    Locație:
    Dorset
    ....So, it's a Doncaster tender; look at the rows of rivets!

    (Runs for cover)
     
  13. Broomhalla

    Broomhalla Well-Known Member

    Înscris:
    10 Apr 2007
    Mesaje:
    1.674
    Aprecieri primite:
    1
    To be honest i was expecting a corridor tender but then that would be historically incorrect. Looks great by the way and it will soon be looking even better on the mainline.
     
  14. 5944

    5944 Resident of Nat Pres

    Înscris:
    14 Ian 2006
    Mesaje:
    8.863
    Aprecieri primite:
    9.270
    Sex:
    Masculin
    Ocupație:
    Train Maintainer for GTR at Hornsey
    Locație:
    Letchworth
    Heritage Railway Volunteer:
    No I do not currently volunteer
    1, 2, 3, 4,........ nope, running out of fingers to count them all on!
     
  15. Sir Nigel Gresley

    Sir Nigel Gresley Member

    Înscris:
    24 Noi 2006
    Mesaje:
    881
    Aprecieri primite:
    148
    Ocupație:
    Retired Soldier of Fortune
    Locație:
    Dorset

    Must I reiterate this for the benefit of those too lazy to look at books on the subject?: There was a very distinct difference between the tenders of the Doncaster-built A1's and the Darlington version: The Doncaster ones were snap-head rivetted ("knobbly" for the benefit of the lazy), and the Darlington ones were counter-sunk rivetted ("smooth").

    Try reading (or looking at the pictures in) the following:

    Locomotives of the LNER, Part 2A, Tender Engines Classes A1 to A10, published by RCTS
    Yeadon's Register of LNER Locomotives, Volume 3, Raven, Thompson & Peppercorn Pacifics
    The Power of the A1s, A2s and A3s, by J S Whiteley & G W Morrison
    North Eastern Pacifics (Bradford Barton)

    The latter two are basically picture-books, so you should be alright there!
     
  16. Guest

    Guest Guest


    Must I reiterate this for the benefit of those too lazy to look at books on the subject?: There was a very distinct difference between the tenders of the Doncaster-built A1's and the Darlington version: The Doncaster ones were snap-head rivetted ("knobbly" for the benefit of the lazy), and the Darlington ones were counter-sunk rivetted ("smooth").

    Try reading (or looking at the pictures in) the following:

    Locomotives of the LNER, Part 2A, Tender Engines Classes A1 ro A10, published by RCTS
    Yeadon's Register of LNER Locomotives, Volume 3, Raven, Thompson & Peppercorn Pacifics
    The Power of the A1s, A2s and A3s, by J S Whiteley & G W Morrison
    North Eastern Pacifics (Bradford Barton)

    The latter two are basically picture-books, so you should be alright, there![/quote:n814gf7t]

    I wouldn't have put in that last comma in your last sentence. It spoils the flow of it.
     
  17. Stu in Torbay

    Stu in Torbay Part of the furniture

    Înscris:
    6 Sep 2005
    Mesaje:
    2.829
    Aprecieri primite:
    42
    Ocupație:
    GPS Navigation Engineer
    Locație:
    Goodrington Bank, Paignton
    Short news item on BBC R4 this morning (short as in 10 secs!)
     
  18. daveb

    daveb Member

    Înscris:
    5 Sep 2005
    Mesaje:
    945
    Aprecieri primite:
    484
    Sex:
    Masculin
    Locație:
    Wimborne, Dorset
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Longer article on Beeb website....http://news.bbc.co.uk/1/hi/uk/7238506.stm

    Contains the usual journalistic inaccurracies, of course. It's a "steam train" and it's called "The Tornado"...
     
  19. cg

    cg Well-Known Member

    Înscris:
    19 Oct 2005
    Mesaje:
    1.318
    Aprecieri primite:
    247
    Sex:
    Masculin
    BBC figures look suspect on no of steam trains in operation in the UK; 1300+? ](*,)

    Add on the nonsense about British Rail.

    The BBC publicity is better than nothing at all, but some better subediting would have been in order.
     
  20. NDTSDN

    NDTSDN Part of the furniture

    Înscris:
    9 Oct 2005
    Mesaje:
    2.864
    Aprecieri primite:
    0
    Locație:
    A, A
    I don't normally listen to Radio 4, but this morning by fluke I did hear the clip whilst going through the channels.

    Is was a very brief snippet indeed but at least it was a broadcast.

    Perhaps Ben Ando could be the BBC correspondent. I understand he is an enthusiast.
     

Distribuie pagina asta