If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

Tornado

Тема в разделе 'Steam Traction', создана пользователем Leander's Shovel, 20 окт 2007.

  1. chrishallam

    chrishallam Well-Known Member

    Дата регистрации:
    25 мар 2007
    Сообщения:
    1.039
    Симпатии:
    377
    Адрес:
    Uk
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Quite impressive to get rivet counting on an all-welded design! \:D/
     
  2. Steve

    Steve Resident of Nat Pres Friend

    Дата регистрации:
    7 окт 2006
    Сообщения:
    12.732
    Симпатии:
    11.847
    Род занятий:
    Gentleman of leisure, nowadays
    Адрес:
    Near Leeds
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Who said it was an all welded cab?

    The cab is neither Doncaster nor Darlington! It was assembled at Grosmont on the NYMR but I cant' remember whether it is flush or snap head on the outside!.
     
  3. dace83

    dace83 Well-Known Member

    Дата регистрации:
    7 май 2007
    Сообщения:
    2.095
    Симпатии:
    4
  4. Sir Nigel Gresley

    Sir Nigel Gresley Member

    Дата регистрации:
    24 ноя 2006
    Сообщения:
    881
    Симпатии:
    148
    Род занятий:
    Retired Soldier of Fortune
    Адрес:
    Dorset
    Rivets

    This is not just an "anorak" question:
    For those of you too young to have seen the A1's in the flesh, or who have not read the books (looked at the pictures) there is a distinct, and highly visible difference between the two (Doncaster and Darlington) batches as far as the tenders are concerned. The Darlington tenders were smooth, whereas the Doncaster ones were "knobbly", as were the cabs, to a less obvious degree, so you could tell, from a distance, where the loco was built, although some tenders got swapped towards the very end.
     
  5. southyorkshireman

    southyorkshireman Resident of Nat Pres

    Дата регистрации:
    28 июн 2005
    Сообщения:
    6.558
    Симпатии:
    34
    Адрес:
    Rotherham 41D or Metropolitan Railway boardroom
    Didn't Darlo paint the cylinder covers differently as well?
     
  6. dace83

    dace83 Well-Known Member

    Дата регистрации:
    7 май 2007
    Сообщения:
    2.095
    Симпатии:
    4
    i very much doubt they would do an open day at carnforth then :smt010
     
  7. Sheff

    Sheff Resident of Nat Pres

    Дата регистрации:
    21 апр 2006
    Сообщения:
    8.059
    Симпатии:
    3.138
    Пол:
    Мужской
    Род занятий:
    Retired Engineer & Heritage Volunteer
    Адрес:
    N Warks
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Eh?
     
  8. dace83

    dace83 Well-Known Member

    Дата регистрации:
    7 май 2007
    Сообщения:
    2.095
    Симпатии:
    4
  9. Sir Nigel Gresley

    Sir Nigel Gresley Member

    Дата регистрации:
    24 ноя 2006
    Сообщения:
    881
    Симпатии:
    148
    Род занятий:
    Retired Soldier of Fortune
    Адрес:
    Dorset
    'fraid not, 60014 was scrapped!


    As an afterthought, wouldn't it be nice if the surviving Class 60 diesels were to receive the names of their steam predecessors.
     
  10. Sir Nigel Gresley

    Sir Nigel Gresley Member

    Дата регистрации:
    24 ноя 2006
    Сообщения:
    881
    Симпатии:
    148
    Род занятий:
    Retired Soldier of Fortune
    Адрес:
    Dorset
    In LNER days, Darlington stuck to the NER tradition of painting the cylinder covers green (on green locos), and their shade of green was adopted as LNER standard.

    The first Darlington-built A1, 60130 was completed in September 1948, and although it appeared in LNER green, with BRITISH RAILWAYS on the tender, its cylinder covers were black! It was named KESTREL in July 1950, and was painted BR blue at the same time. It received its final livery of BR green in January 1952.
     
  11. guycarr360

    guycarr360 Part of the furniture

    Дата регистрации:
    4 окт 2005
    Сообщения:
    4.834
    Симпатии:
    3.159
    Пол:
    Мужской
    Адрес:
    Chester le Street County Durham
  12. Sir Nigel Gresley

    Sir Nigel Gresley Member

    Дата регистрации:
    24 ноя 2006
    Сообщения:
    881
    Симпатии:
    148
    Род занятий:
    Retired Soldier of Fortune
    Адрес:
    Dorset
    ....So, it's a Doncaster tender; look at the rows of rivets!

    (Runs for cover)
     
  13. Broomhalla

    Broomhalla Well-Known Member

    Дата регистрации:
    10 апр 2007
    Сообщения:
    1.674
    Симпатии:
    1
    To be honest i was expecting a corridor tender but then that would be historically incorrect. Looks great by the way and it will soon be looking even better on the mainline.
     
  14. 5944

    5944 Resident of Nat Pres

    Дата регистрации:
    14 янв 2006
    Сообщения:
    8.863
    Симпатии:
    9.270
    Пол:
    Мужской
    Род занятий:
    Train Maintainer for GTR at Hornsey
    Адрес:
    Letchworth
    Heritage Railway Volunteer:
    No I do not currently volunteer
    1, 2, 3, 4,........ nope, running out of fingers to count them all on!
     
  15. Sir Nigel Gresley

    Sir Nigel Gresley Member

    Дата регистрации:
    24 ноя 2006
    Сообщения:
    881
    Симпатии:
    148
    Род занятий:
    Retired Soldier of Fortune
    Адрес:
    Dorset

    Must I reiterate this for the benefit of those too lazy to look at books on the subject?: There was a very distinct difference between the tenders of the Doncaster-built A1's and the Darlington version: The Doncaster ones were snap-head rivetted ("knobbly" for the benefit of the lazy), and the Darlington ones were counter-sunk rivetted ("smooth").

    Try reading (or looking at the pictures in) the following:

    Locomotives of the LNER, Part 2A, Tender Engines Classes A1 to A10, published by RCTS
    Yeadon's Register of LNER Locomotives, Volume 3, Raven, Thompson & Peppercorn Pacifics
    The Power of the A1s, A2s and A3s, by J S Whiteley & G W Morrison
    North Eastern Pacifics (Bradford Barton)

    The latter two are basically picture-books, so you should be alright there!
     
  16. Guest

    Guest Guest


    Must I reiterate this for the benefit of those too lazy to look at books on the subject?: There was a very distinct difference between the tenders of the Doncaster-built A1's and the Darlington version: The Doncaster ones were snap-head rivetted ("knobbly" for the benefit of the lazy), and the Darlington ones were counter-sunk rivetted ("smooth").

    Try reading (or looking at the pictures in) the following:

    Locomotives of the LNER, Part 2A, Tender Engines Classes A1 ro A10, published by RCTS
    Yeadon's Register of LNER Locomotives, Volume 3, Raven, Thompson & Peppercorn Pacifics
    The Power of the A1s, A2s and A3s, by J S Whiteley & G W Morrison
    North Eastern Pacifics (Bradford Barton)

    The latter two are basically picture-books, so you should be alright, there![/quote:n814gf7t]

    I wouldn't have put in that last comma in your last sentence. It spoils the flow of it.
     
  17. Stu in Torbay

    Stu in Torbay Part of the furniture

    Дата регистрации:
    6 сен 2005
    Сообщения:
    2.829
    Симпатии:
    42
    Род занятий:
    GPS Navigation Engineer
    Адрес:
    Goodrington Bank, Paignton
    Short news item on BBC R4 this morning (short as in 10 secs!)
     
  18. daveb

    daveb Member

    Дата регистрации:
    5 сен 2005
    Сообщения:
    945
    Симпатии:
    484
    Пол:
    Мужской
    Адрес:
    Wimborne, Dorset
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Longer article on Beeb website....http://news.bbc.co.uk/1/hi/uk/7238506.stm

    Contains the usual journalistic inaccurracies, of course. It's a "steam train" and it's called "The Tornado"...
     
  19. cg

    cg Well-Known Member

    Дата регистрации:
    19 окт 2005
    Сообщения:
    1.318
    Симпатии:
    247
    Пол:
    Мужской
    BBC figures look suspect on no of steam trains in operation in the UK; 1300+? ](*,)

    Add on the nonsense about British Rail.

    The BBC publicity is better than nothing at all, but some better subediting would have been in order.
     
  20. NDTSDN

    NDTSDN Part of the furniture

    Дата регистрации:
    9 окт 2005
    Сообщения:
    2.864
    Симпатии:
    0
    Адрес:
    A, A
    I don't normally listen to Radio 4, but this morning by fluke I did hear the clip whilst going through the channels.

    Is was a very brief snippet indeed but at least it was a broadcast.

    Perhaps Ben Ando could be the BBC correspondent. I understand he is an enthusiast.
     

Поделиться этой страницей