If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

Bittern Light Engine move back to MHR

Тема в разделе 'What's Going On', создана пользователем 73129, 23 мар 2009.

  1. 73129

    73129 Part of the furniture

    Дата регистрации:
    24 сен 2007
    Сообщения:
    4.547
    Симпатии:
    1.183
    Адрес:
    Winchester
    Hi anyone that would like to see Bittern on her return journey back to the MHR. The times are now out on UK steam info. Once she's back on MHR metals she should be facing smoke box out of Alresford.

    http://www.uksteam.info/tours/t09/t0330p.htm
     
  2. malc

    malc Part of the furniture

    Дата регистрации:
    28 июн 2005
    Сообщения:
    2.475
    Симпатии:
    330
    60019 is currently facing Minehead and the WSR Steam Gala Programme says it's currently above the permitted load for Minehead turntable. Any ideas how its going to turn before the run back to Alton?
     
  3. 73129

    73129 Part of the furniture

    Дата регистрации:
    24 сен 2007
    Сообщения:
    4.547
    Симпатии:
    1.183
    Адрес:
    Winchester
    Don't hold me to this. But I seem to remember there is a triangle in the Guildford area.
    :-k :-k :-k :-k
     
  4. Dan Hamblin

    Dan Hamblin Part of the furniture

    Дата регистрации:
    27 мар 2006
    Сообщения:
    2.549
    Симпатии:
    190
    Род занятий:
    Rolling Stock Engineer
    Адрес:
    Kent
    The question was more in relation to how will it be turned in the vicinity of the WSR, to prevent tender first running back to the MHR.

    I wonder if they will split the loco and turn both halves on the Minehead turntable :-k

    Regards,

    Dan
     
  5. southyorkshireman

    southyorkshireman Resident of Nat Pres

    Дата регистрации:
    28 июн 2005
    Сообщения:
    6.558
    Симпатии:
    34
    Адрес:
    Rotherham 41D or Metropolitan Railway boardroom
    Bristol? How's the triangle at Norton coming along?
     
  6. gwr4090

    gwr4090 Part of the furniture

    Дата регистрации:
    8 авг 2005
    Сообщения:
    2.847
    Симпатии:
    222
    Пол:
    Мужской
    Род занятий:
    Scientist (Rtd)
    Адрес:
    Dorset
    Almost certainly on the Minehead turntable after the gala, as part of the turntable testing programme. The turntable is undergoing an incremental certification process involving engines of progressively increasing size and weight. The fallback would be to run tender first as far as Westbury, en route back to the Mid Hants, although the current times make no provision for this.

    David
     
  7. 6026 King John

    6026 King John Well-Known Member

    Дата регистрации:
    10 ноя 2006
    Сообщения:
    1.616
    Симпатии:
    908
    Адрес:
    Hampton Court, Surrey
    So did they manage to turn Bittern at Minehead? I see that the move has now been postponed till tomorrow anyway.
     
  8. buseng

    buseng Part of the furniture

    Дата регистрации:
    9 сен 2005
    Сообщения:
    4.801
    Симпатии:
    349
    Пол:
    Мужской
    Род занятий:
    Retired
    Адрес:
    Tilehurst, Reading, Berks.
    Nice to read this, waited at Reading till 14.30! Didn't read the forum until 15.00 due to work.
     
  9. Ann Clark

    Ann Clark Member

    Дата регистрации:
    5 дек 2007
    Сообщения:
    476
    Симпатии:
    2
    Адрес:
    Poole
    When I left WSR this morning she was still facing Minehead and she was at BL ready for the move tomorrow.
     
  10. gwr4090

    gwr4090 Part of the furniture

    Дата регистрации:
    8 авг 2005
    Сообщения:
    2.847
    Симпатии:
    222
    Пол:
    Мужской
    Род занятий:
    Scientist (Rtd)
    Адрес:
    Dorset
    Bittern is now due to turn at Westbury.

    David
     
  11. Autotank

    Autotank Member

    Дата регистрации:
    25 ноя 2005
    Сообщения:
    555
    Симпатии:
    130
    Пол:
    Мужской
    Род занятий:
    Radio Producer
    Адрес:
    Berkshire
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Anybody got updates on this move? Hoping to see her at lunchtime if all goes to plan.
     
  12. coastwalker

    coastwalker New Member

    Дата регистрации:
    11 сен 2005
    Сообщения:
    133
    Симпатии:
    0
    Род занятий:
    None
    Адрес:
    Ash, Surrey
    I was wondering too. Hoping to see her go past later
     
  13. Autotank

    Autotank Member

    Дата регистрации:
    25 ноя 2005
    Сообщения:
    555
    Симпатии:
    130
    Пол:
    Мужской
    Род занятий:
    Radio Producer
    Адрес:
    Berkshire
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Went through Reading around 1405 on Platform 9 which caught me out! Only a very brief stop.

    Followed a couple of minutes later by a WCR '47' with a single MkII from the green train which I assume was heading for Southall. Bonus!
     
  14. buseng

    buseng Part of the furniture

    Дата регистрации:
    9 сен 2005
    Сообщения:
    4.801
    Симпатии:
    349
    Пол:
    Мужской
    Род занятий:
    Retired
    Адрес:
    Tilehurst, Reading, Berks.
    Caught me out as well, nearly missed it as I was leaving work at 2PM, especially after yesterday's abortive wait.
    Wasn't there a Green Train MK2 in an empty stock move up north recently? Somebody commented is wasn't the one with the flats.
    Probably the same one returning.
     
  15. Steamage

    Steamage Part of the furniture

    Дата регистрации:
    14 сен 2005
    Сообщения:
    4.748
    Симпатии:
    1.121
    Адрес:
    Oxford
    Yes, one went north with Tangmere and the Queen Of Scots set a few weeks back.
     
  16. Shoddy127

    Shoddy127 Well-Known Member

    Дата регистрации:
    1 июн 2005
    Сообщения:
    1.905
    Симпатии:
    330
    Пол:
    Мужской
    Адрес:
    Portsmouth
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Apparently this mk2 has had a bogie change due to the flats on it and 2 other coaches have also arrived back to join the set after being turned on the ground lathe at Tyseley, these 3 being added to the others also done in January.
     

Поделиться этой страницей