If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

Davies and Metcalfe Vale of Rheidol locos

本贴由 PoleStar 于 2019-04-20 发布. 版块名称: Model Railways

  1. PoleStar

    PoleStar New Member

    注册日期:
    2018-11-10
    帖子:
    75
    支持:
    42
    性别:
    男
    所在地:
    West Midlands
    Heritage Railway Volunteer:
    No I do not currently volunteer
    This is a long shot, but possibly someone on here may be able to help.

    I am building a model of an original Vale of Rheidol loco, getting on quite well but I am stuck for a couple of details. My questions are:

    1. Was the top of the boiler plated over, as it is on the GWR version, or was there an empty space between the boiler and the back of the tanks?

    2. Which side of the cab was the reverse lever, and how was it mounted? My impression is that the driver stood on the right, but the reverse lever was on the left.

    I am not aiming for a fine scale model, but it would be nice to get it reasonably correct. Thanks in advance..!
     
    PoleStar, 2019-04-20
    #1

分享此页面